Telit LT70-868 Terminal User Guide

This user guide introduces the features and usage of LT70-868 Terminal


Telit LT70-868 Terminal User Guide - cover page
Brand
Telit
Category
Communications equipment
Document type
User Manual
Language
English
Pages
24
File format
PDF
File size
511 KB
Published
02 November, 2023
Updated
02 November, 2023
MD5 checksum
34AFB583774E0D49FCE49036BB3F03D0

About this manual

This user guide (1VV0301096 Rev.0, 24/10/2013) presents the hardware features and application of the Telit LT70-868 radio terminal. It describes the electrical and mechanical characteristics, the casing, connectors, cabling and power supply, and points to separate reference documents for the software functionalities, the LE70-868 module and the Star Network Protocol.

The terminal is a multi-channel radio terminal delivering up to 500 mW in the 868 MHz ISM band, with point-to-point, multipoint or mesh operating modes. Later chapters cover mechanics and connection, cable descriptions, installation principles and cautions, connection to an RS422 or RS485 interface, terminal reflashing through the serial link, and a summary of the ETSI 300 220-2 v2.4.1 requirements and declarations of compliance.

What's inside

  • Introduction
  • Reference Documents
  • Document Change Log
  • Glossary
  • General Requirements
  • Temperature Characteristics
  • Mechanical Characteristics
  • DC Characteristics
  • Functional Characteristics
  • Ordering Information and Accessories

Specifications

Frequency band869.400 MHz - 869.650 MHz (ERC Rec 70-03 band g3)
RF output powerSelectable by software from +15 dBm to +27 dBm at 3.6 V
Modulation format2GFSK
Channel width250 kHz
Transmission duty cycle≤ 10%
RF data rates1.2, 2.4, 4.8, 9.6, 19.2, 38.4 and 57.6 kbps
Operating temperature-40 °C to +85 °C
Storage temperature-40 °C to +85 °C (relative humidity 0 to 95%)
DimensionsBox 100 x 66 x 47 mm
Antenna length90 mm (removable antenna version)
Supply voltage options6 V, 12 V and 40 V

Frequently asked questions

Which frequency band does the LT70-868 terminal use?

It uses ERC Rec 70-03 band g3, from 869.400 MHz to 869.650 MHz, with a 250 kHz total bandwidth.

What is the duty cycle limitation?

The transmission duty cycle must be ≤ 10%, which limits each terminal to a total transmit time of 6 minutes per hour; respecting it is the user's responsibility.

Which operating modes does the terminal support?

It allows point-to-point, multipoint or mesh functioning modes.

How is the LT70-868 terminal reflashed?

It is re-flashed through the serial link: switch off the power supply, open the casing, put the PROG switch in the ON position and switch the power supply on.

How are the connectors and antenna arranged?

Connections use terminal blocks inside the casing, exiting through a cable gland, and the removable antenna version has a 90 mm antenna. No LEDs are available.

Download PDF (511 KB)

More Telit Manuals


View all Telit manuals →