Jotafloor EP SL is a high-performance epoxy coating that self-levels to leave a seamless surface. It is abrasion, impact, chemical and slip resistant. It is to be used as midcoat/topcoat as part of a complete system in atmospheric environments. Suitable on approved primers on concrete substrates.
Jotafloor EP SL is a two-component, solvent-free, amine-cured epoxy coating from Jotun. It is described as self-leveling and seamless, with resistance to abrasion, impact, chemicals and slip, and is intended for use as a midcoat/topcoat in atmospheric environments on approved primers on concrete substrates.
This Application Guide covers scope and referred standards, surface preparation, product mixing, induction time and pot life, cleaning solvent, application data, repair of the coating system, and drying/curing times. It gives a 4.7:1 volume mixing ratio for Component A and Component B, a 3-minute induction time and a 20-minute pot life.
| Product description | Two-component solvent-free amine-cured epoxy coating |
|---|---|
| Maximum moisture content | 4% |
| Maximum relative humidity | 80% |
| Temperature range | 23°C to 40°C |
| Concrete pH | 7-9 |
| Substrate temperature above dew point | At least 3°C |
| Induction time | 3 min |
| Pot life | 20 min |
| Cleaning solvent | Jotun Thinner No. 17 |
| Solvent thinners | Not permitted |
It is used as a midcoat/topcoat as part of a complete system in atmospheric environments, suitable on approved primers on concrete substrates.
The pot life is 20 minutes.
The guide specifies an induction time of 3 minutes before application.
Jotun Thinner No. 17 is specified as the cleaning solvent.