The SY-5 filter is a filter product produced by the Yaoshidake pressure reducing valve company. This product is mainly used in steam, air, cold and hot water, oil and other non-hazardous fluid pipelines, and can effectively filter impurities, iron slag and other foreign objects.
This manual is for the Yaoxidakai EPDT-285b SY-5 type filter. It describes a filter widely used for dust removal in various pipelines, installed especially at the front of pressure-reducing valves, temperature control valves, solenoid valves, and steam traps.
It lists applicable fluids, maximum pressure and temperature, materials, connection type, dimensions and weights for sizes 10A to 50A, operation, caliber selection, maintenance and inspection, disassembly, cleaning and assembly, and piping examples. The standard mesh is 80 mesh, with 20 to 100 mesh available on request. This manual is written in Chinese.
| Applicable fluids | Steam, air, cold and hot water, oil, other non-hazardous fluids |
|---|---|
| Maximum pressure | 2.0 MPa |
| Maximum temperature | 220℃ |
| Valve body material | Ductile cast iron |
| Optional mesh sizes | 20 to 100 mesh |
| Controlled differential pressure | 0.1 MPa or below |
Steam, air, cold and hot water, oil, and other non-hazardous fluids.
After confirming there is no pressure inside the valve body, remove the cap and the mesh and rinse them with compressed air or water.
Install the filter with the cap facing down. If the fluid is steam, connect the piping with the cap facing the side to reduce condensate accumulation.