Arnott AS-3156 New Eibach Left Front Air Strut 2013-2019 Mercedes-Benz GL/GLS (X166) Without ADS (ADS PLUS Excepted)

Arnott new Eibach left front air strut, suitable for 2013-2019 Mercedes-Benz GL/GLS (X166).


Arnott AS-3156 New Eibach Left Front Air Strut 2013-2019 Mercedes-Benz GL/GLS (X166) Without ADS (ADS PLUS Excepted) - cover page
Brand
Arnott
Category
Car parts
Document type
Installation Guide
Language
Chinese
Pages
12
File format
PDF
File size
2.1 MB
Published
30 October, 2023
Updated
30 October, 2023
MD5 checksum
B4F618A4409A88E9727B7BD01D41493D

About this manual

This document is the version 1 (10/05/2021) installation instructions for the Arnott AS-3156, a new Eibach left front air strut for 2013-2019 Mercedes-Benz GL/GLS (X166) vehicles without ADS (ADS PLUS excepted). It covers removal of the original air strut and installation of the new Arnott air strut, including fitting the supplied VOSS fitting and replacing the original airline fitting.

The manual states that removal and installation of air suspension products must be performed by fully qualified professionals, and warns that the air suspension system is pressurized (up to 10 bar / 150 lbf/in), so pressure must be released and power disconnected before disassembly. It also lists storage temperature limits and advises using the vehicle manufacturer's diagnostic software. Contact information for Arnott technical assistance in North America and Europe is provided. This manual is written in Chinese.

What's inside

  • Safety warnings
  • Basic information and disclaimer
  • Air strut removal
  • Air strut installation
  • VOSS fitting installation
  • Original airline fitting removal
  • Reassembly and torque to manufacturer specifications

Specifications

Maximum system pressure10 bar (150 lbf/in)
Storage temperature range5°F (-15°C) to 122°F (50°C)
Top mounting nuts3

Frequently asked questions

What should be done before disassembling the air suspension system?

Confirm the pressure has been released and the power to the air suspension system is disconnected, since the system is pressurized up to 10 bar (150 lbf/in).

Who should install the Arnott AS-3156 air strut?

Removal and installation of air suspension products must be done by fully qualified professionals with ASE certification.

What is the allowed storage temperature for the air strut?

Storage temperature must not be below 5°F (-15°C) or above 122°F (50°C).

What should I check before connecting the air line to the new strut?

Inspect the air line for scratches or cuts, which can cause leaks; if the air line is damaged it should be replaced.

Download PDF (2.1 MB)

More Arnott Manuals


View all Arnott manuals →