SMC-Program is a program for controlling SMSD controllers. The program uses the PC's COM port to load commands to the controller (RS-232 interface). It is possible to save running programs on the PC or load ready programs. The program provides many features to help the user easily use the SMC-Program program.
SMC-Program by Smart Motor Devices controls SMSD controllers through a personal computer COM port using the RS-232 interface. The manual covers program assignment, driver installation, and the user interface.
It also describes port selection and setup, status indicator panels, simple and programming control modes, the command panel, operation logs, error handling, and program version information.
| Communication interface | RS-232 via COM port |
|---|---|
| Baud rate | 9600 bps |
| Parity | even |
| Stop bits | 1 |
| Data bits | 8 |
| Speed range | 1 – 10 000 steps per second |
| Start speed range | 0 – 2 000 steps per second |
| Acceleration range | -500 / +500 step/sec2 |
| Delay time range | 1 – 99999999 ms |
| Steps range | 1 – 10000000 steps |
| Saved program file extensions | *.smc and *._smc |
It uses the COM port of a personal computer with an RS-232 interface.
Saved executing programs use the *.smc and *._smc extensions.
The program requires 9600 bps baud rate, even parity, one stop bit, and 8 bits per byte.
Extract files from the archive and launch the CP210x_VCP_Win_XP_S2K3_Vista_7.exe install file.