SEEIT TL866II+ Universal Programmer User Manual

TL866II+ is an universal programmer which supports more than 13.000 components. Its device list includes EEPROMs, EPROMs, SPI FLASHs and more.


SEEIT TL866II+ Universal Programmer User Manual - cover page
Brand
SEEIT
Category
Other Electronics
Document type
User Manual
Language
English
Pages
20
File format
PDF
File size
9.7 MB
Published
27 October, 2023
Updated
27 October, 2023
MD5 checksum
A33A4ADCBF27A67DAD0D6B9952090BF3

About this manual

The SEEIT TL866II+ is a universal programmer with a ZIF40 socket and SPI connector that supports over 13,000 components including EPROMs, EEPROMs, flash memories, microcontrollers, and logic ICs. It connects via USB without an external power supply and includes protection against shorts and overvoltage.

The programmer offers fast programming speeds, supports in-circuit serial programming (ICSP) for many microcontrollers, and provides comprehensive logic IC testing for 54/74 and CMOS4000 series. It features programmable VCC (3.3–6.5V) and VPP (3.3–21V) voltages, multi-stage LC filtering, and grade-3 over-current protection. Firmware upgrades are available from the manufacturer's website.

What's inside

  • Introduction
  • Hardware & Electrical Specifications
  • Product Contents
  • Chip Supporting Range
  • Performance
  • Programmable Power Supply
  • Over-voltage and Over-current Protection
  • 40-Pin Universal Socket
  • ICSP In-Circuit Programming
  • Logic IC Functional Testing

Specifications

Dimensions (board)100 x 60 x 25 mm
Weight (board)95 g
Dimensions (package)188 x 115 x 34 mm
Weight (package)250 g
Power supplyUSB port
InterfaceUSB 1.1, 2.0 or higher
Programmable VCC range3.3 V to 6.5 V
Programmable VPP range3.3 V to 21 V
Communication speed12 Mbps
Power consumption (idle)7 mA
Maximum programming power output2 W
Short-circuit response timewithin 100 µs

Frequently asked questions

What chips does the TL866II+ support?

It supports over 13,000 components including parallel ROM/EPROM/EEPROM, serial EEPROM/flash, AVR and PIC microcontrollers, PLD/GAL devices, and SRAM/DRAM.

Does the programmer need an external power supply?

No, it is powered entirely through the USB port and does not require an external power supply.

Can the TL866II+ perform in-circuit programming?

Yes, it provides an ICSP connector for in-circuit serial programming of supported microcontrollers such as AVR, PIC, and others.

What protection features does the programmer have?

It has independent grade-3 over-current protection for VCC and VPP, per-pin VPP over-voltage protection, and cuts off power within 100 µs on short circuit.

Download PDF (9.7 MB)