Roll On Rock System 2 is a floor coating product that can provide the look of granite and protect the substrate from abrasion, wear, and chemical attack.
The Roll On Rock System 2 is a multi-layered broadcast flake system designed to provide a granite-like appearance to flooring surfaces while protecting the substrate from abrasion, wear, and chemical attack. The system utilizes a direct-to-concrete epoxy primer and flake basecoat, decorative broadcast flakes, and a clear topcoat to create a durable, high-gloss finish.
| MVE Resistance | more than 8 lbs |
|---|---|
| Pot Life (200g mass) | 180 minutes |
| Pot Life (2 gal mass) | 60 minutes |
| Minimum Temperature | 50°F (10°C) |
| Maximum Relative Humidity | 80% |
| Moisture Vapor Transmission Limit | 5lb per 1000 ft2 per 24 hours |
| Wet Film Thickness | 5-8 mils |
| Coverage (4195 Primer) | 225 ft/Kit/Gal |
| Coverage (5400 Topcoat) | 400 sq ft per 1.5 gal kit |
Substrate and ambient temperatures must be above 50°F (10°C) during installation.
The area may be opened to light vehicular traffic in 48-72 hours depending on environmental conditions.
Yes, it can be thinned with up to a ½ pint of Xylene, though this increases VOC and may affect compliance in certain districts.