This document is a user manual for 50DTC Style Mixer and 50DTD Style Mixer, introducing their installation, operation and maintenance methods
This manual provides step-by-step instructions for installing, operating, and maintaining Chemineer 50DTC and 50DTD small mixers. It covers initial inspection, storage, mounting options (clamp/cup plate or open tank), lubrication, motor types, and maintenance procedures including disassembly and reassembly. The document includes tables for torque values, beam sizes, and lubrication frequencies, as well as figures for installation setups and wiring diagrams. This manual is written in Chinese.
| Recommended Beam Sizes | See Table 1 for tank diameter to beam size correlation |
|---|---|
| Bolt Tightening Torque | Refer to Table 3 for torque values |
| Lubrication Frequency | Rotate drive coupling 10 to 15 revolutions monthly |
Store in a clean, dry indoor location free from vibration and excessive heat. Do not stack crates. Inspect for rust every six months and apply rust preventative as needed.
The model number is 50DTC/50DTD.
The initial torque value is 18 ft-lb (24.4 Nm).
The maximum allowable deflection is 1/64 inch (.4mm) per foot of length.