This manual describes how to clean the filter screen on a Jacuzzi vacuum head.
This one-page quick guide from Jacuzzi covers cleaning the Manual Vac vacuum head. It lists the end-cap base, end-cap assembly, wall mount slide-on brush, wide-end nozzle and dual-end nozzle, and gives a six-step procedure for removing debris from the filter.
The steps explain how to rotate and pull out the end-cap assembly, rotate off the filter screen, rinse both parts, check that the seal ring is flat and free of grit, then line up the notches and slide the screen back until it locks before rotating the end-cap assembly back into the body. The document is distributed by Leslie's Poolmart, Inc., Phoenix, AZ.
| Size | 80*130 mm |
|---|---|
| SKU | 48827 |
Rotate the end-cap assembly counterclockwise and gently pull it out.
Hold the end-cap assembly and rotate the filter screen counterclockwise about 1/8 inch or until you feel it stop, then pull it off.
Make sure the seal ring inside the end-cap assembly is flat with no grit.
Line up the filter screen notches with the end-cap assembly grooves and slide the screen into place by gently rotating clockwise about 1/8 inch until it locks.