Switch-It Dual Pro Head Array Owner's Manual

This manual introduces the use of Switch-It Dual Pro Head Array, including the features and usage precautions of the product, as well as how to correctly disassemble and recycle it.


Switch-It Dual Pro Head Array Owner's Manual - cover page
Brand
Switch-it
Category
Home medical equipment
Document type
User Manual
Language
English
Pages
8
File format
PDF
File size
699 KB
Published
26 October, 2023
Updated
26 October, 2023
MD5 checksum
F2A5BD21AE4DEEF82E01013BE784A2C7

About this manual

The Switch-It Dual Pro Head Array is a fully adjustable, truly proportional head array with on-board programming for fine-tuned adjustments. It combines proximity and force sensor technologies to provide a precise and intuitive driving experience, available with long facial pads or round spot pads. The manual covers disposal information, safety warnings, product description, technical specifications, compatibility with various wheelchair electronics, key features, sensitivity adjustment, and tilt sensor calibration.

The Dual Pro connects via D-Sub 9 to the wheelchair display and requires specific modules for compatibility with Penny & Giles R-Net, Curtis Enable 50, or Dynamic Controls DX2 systems. It features three 1/8-inch SmartJack ports for external switches. Sensitivity can be programmed from the back pad, with each light representing approximately 20% of programmed speed. The tilt sensor disables the back pad during pressure relief and can be set or disabled through a power-cycle procedure.

What's inside

  • Disposal and Recycling Information
  • Sunrise Medical Contact Information
  • Safety Warnings
  • User Information
  • Product Description
  • Technical Information
  • Compatibility
  • Key Features
  • Sensitivity Adjustment
  • Calibration

Specifications

Alternative Control TypeProportional
Activation TypeProximity and Force
Activation Surface (DPA)4-in x 2-in (100mm x 50mm)
Activation Surface (DPP)2-in x 1-in (50mm x 25mm)
Activation ForceAdjustable
Sensing Distance10 mm
FeedbackPower wheelchair movement
Connector TypeD-Sub 9 connection to wheelchair display
Back Pad Dimensions6.5-in x 4.75-in (165mm x 120mm)
Long Facial Pad Dimensions5-in x 1.5-in (127mm x 38mm)
Round Spot Pad Diameter2.5-in (63.6mm)

Frequently asked questions

What electronics are compatible with the Dual Pro Head Array?

The Dual Pro is compatible with Penny & Giles R-Net (requires Omni module), Curtis Enable 50 (requires Enhanced display), and Dynamic Controls DX2 (requires Switch-It DX Dongle).

What are the SmartJack ports used for?

The three 1/8-inch SmartJack ports on the bottom of the back pad connect external switches for mode, reverse, and an assignable user switch.

Download PDF (699 KB)