This document is the LYYN Hawk board and LYYN Hawk integration kit manual, which introduces the product features and characteristics, as well as the usage methods.
The LYYN Hawk board products are real-time visibility enhancers intended for applications in CCTV and underwater surveillance and monitoring, reducing the effects of fog, snow, rain, dust, turbid waters and lowlight. The Hawk board product comes with the Hawk PCB board, a control panel with short ribbon cable, connector card, long ribbon cable with connectors, and power connector mating contact. The Hawk Integration Kit also includes a BNC card and a cable assembly to connect the BNC card and Hawk PCB.
This manual describes the Hawk board at a glance, revision histories, controlling the board with the membrane keypad or RS-232/RS-485 serial commands, the position and size of the lyynification window, kit illustrations and assembly, RS485, video signal cables and synchronization, specifications, notices and warranty, regulatory notices, and the serial control reference.
| Video input color standard | PAL 625-line at 25 fps or NTSC 525-line at 30 fps; auto sensing |
|---|---|
| Video output color standard | Same as the input (PAL or NTSC) |
| Analog bypass | Available when the unit is powerless; also selectable through the control port |
| Output format | CVBS, Y/C or automatic; automatic follows the input signal |
| Serial settings | 9600 bps, 8 data bits, 1 stop bit, no parity or flow control |
| Sync input | 0.5 Vpp 75 Ω |
It can be controlled with the membrane keypad panel or by serial communication over RS-232 or RS-485.
Use 9600 bps, 8 data bits, 1 stop bit, and no parity or flow control.
A video test image is normally generated; output remains in the format of the last valid input or last output setting.
No, the DC power input is not polarity protected, so check the power source polarity before connecting it.