This manual introduces the installation and use of AQUASURE HARMONY series whole house water softeners, including product composition, pre-installation preparation, installation steps, fault troubleshooting, etc.
The Aquasure Harmony Series Whole House Water Softener Owner's Manual covers models AS-HS32D, AS-HS48D, AS-HS64D, AS-HS32FM, AS-HS48FM, and AS-HS64FM. It explains how the softener works, lists included components and required tools, and gives inspection and preparation instructions.
The manual then walks through shutting off the main water supply, installing the bypass valve, preparing the brine and resin tanks, connecting the system, starting it up, and programming it. It also includes system operation parameters, safety guidance, feature and display information, dimensions, troubleshooting, and a limited product warranty.
| Maximum water temperature | 100ºF (37.8ºC) |
|---|---|
| Minimum water temperature | 32ºF (0ºC) |
| Maximum inlet water pressure | 125 psi (8.78 kg/cm2) |
| Minimum inlet water pressure | 25 psi (1.75 kg/cm2) |
| Maximum chlorine and chloramine tolerance | 2 ppm |
| Brine tank distance from resin tank | No more than 15 ft |
| Electrical outlet requirement | 120 volt outlet within 6 feet of the softener |
The maximum allowable inlet water pressure is 125 PSI (8.78 kg/cm2).
Use clean water softening salt only with at least 99.5% pure; extra course grade or crystal salt are recommended.
The brine tank should be located no more than 15 feet from the resin tank.
A 120 volt electric outlet is needed within 6 feet of the softener.