SystemBase Eddy-CPU Embedded Device Server User Guide

This manual provides an introduction to the hardware and software of the Eddy-CPU and how to use the Eddy-CPU products


SystemBase Eddy-CPU Embedded Device Server User Guide - cover page
Brand
SystemBase
Category
Other Electronics
Document type
User Manual
Language
English
Pages
55
File format
PDF
File size
1.6 MB
Published
21 October, 2023
Updated
21 October, 2023
MD5 checksum
C105F60FAE7DC52982FB972E5ADF14BC

About this manual

The SystemBase Eddy-CPU is an embedded device server module featuring a Conexant CX82100-41Z processor, 4MB Flash memory, 8MB SDRAM, and a 10/100Mbps Ethernet port. It supports flexible connections to peripheral devices via an 8-bit address/data bus and up to 16 user-programmable IOs. The module is designed for applications requiring UART, I2C, and serial connectivity in a small 38 x 20.8mm form factor.

This guide provides instructions for hardware integration, initial setup, and configuration. Users can manage the device through a web interface or Telnet commands. Key topics include connecting to the device, setting network parameters, configuring GPIO pins, updating firmware, and utilizing management tools like Portview and SNMP.

What's inside

  • Introduction
  • Getting Started
  • Hardware Description
  • Integration
  • Configuration via Web
  • Configuration via Telnet
  • Firmware Update
  • Technical Specifications

Specifications

Processor32-bit ARM9 Processor with 168MHz
Flash Memory4 MB
SDRAM8 MB
GPIOMax 16
LAN Port10/100Mbps
Power Input3.3V
Power Consumption1.3W
Dimensions38.0 x 20.8mm
Operating Temp.0 ~ 50 ˚C
Storage Temp.-20 ~ 80 ˚C
O/SEmbedded Linux (Kernel 2.4.x)

Frequently asked questions

What is the maximum number of user programmable IOs on the Eddy-CPU?

The Eddy-CPU supports a maximum of 16 user programmable IOs.

How do I update the firmware using Telnet?

Connect via Telnet, then issue the command 'upfirm firmware' after uploading the file via TFTP.

Which network protocols does the Eddy-CPU support?

It supports TCP, UDP, Telnet, SSH, SSL/TLS, DDNS, ICMP, DHCP, TFTP, HTTP, and SNMP.

Download PDF (1.6 MB)

More SystemBase Manuals


View all SystemBase manuals →