Teledyne/RDI 300 kHz Workhorse (WH300) Lowered Acoustic Doppler Current Profiler Data Manual

This manual describes “best practices” for acquiring ocean-velocity data using Lowered Acoustic Doppler Current Profiler (LADCP) systems. Adherence to the recommendations in this manual should help ensure that the acquired data can be processed to derive full-depth absolute velocity profiles of high quality. Processing LADCP data, which is not covered in this manual, is not a trivial task and there are several publicly available software packages available for this purpose. Care has been taken to ensure that the guidelines in this manual are independent of the processing software. In principle, any ADCP instrument with sufficient depth rating can be lowered on a wire to obtain LADCP data.


Teledyne/RDI 300 kHz Workhorse (WH300) Lowered Acoustic Doppler Current Profiler Data Manual - cover page
Brand
Teledyne/RDI
Document type
User Manual
Language
English
Pages
21
File format
PDF
File size
2.1 MB
Published
20 October, 2023
Updated
20 October, 2023
MD5 checksum
FB0728F84CF6D80B397D9196142FF342

About this manual

This manual provides best practices for acquiring ocean-velocity data using Lowered Acoustic Doppler Current Profiler (LADCP) systems. It covers instrument setup, data acquisition, and referencing methods to ensure high-quality full-depth velocity profiles. The guide focuses on the Teledyne/RDI 300 kHz Workhorse (WH300) ADCP, including firmware options for bottom-tracking data. It also addresses hardware components like instrument platforms, batteries, and cabling, and emphasizes safety and compatibility with processing software.

The document assumes users have basic knowledge of ADCP systems and oceanographic data collection. It does not cover data processing software, but recommends using publicly available tools. Key constraints for velocity referencing include ship drift, shipboard ADCP data, and bottom-tracking data, which should be used together for optimal accuracy.

What's inside

  • Introduction
  • LADCP Profiling
  • LADCP System Overview
  • ADCP Hardware
  • Teledyne/RDI 300 kHz Workhorse (WH300)

Frequently asked questions

What is the primary ADCP used in LADCP systems?

The primary ADCP used on LADCP systems is usually installed pointing downward and is called a downlooker.

What is required to power the ADCPs during LADCP work?

Most LADCP systems use separate battery packs installed on the instrument platform to power the ADCP(s).

What is the purpose of the LADCP firmware option?

The LADCP firmware option allows the ADCP to calculate bottom-tracking information from regular pings.

Download PDF (2.1 MB)