This manual describes how to use a hydraulic machine that splits wood logs.
This manual provides step-by-step instructions for assembling, operating, maintaining, and storing the NorthStar M11968H log splitter. It includes safety warnings, component identification, initial setup, and troubleshooting. The log splitter is a hydraulic machine designed to split logs up to 30 inches long and 24 inches in diameter. Safety is emphasized throughout, with warnings about high-pressure hydraulic fluid, fire hazards, and crush risks. Regular maintenance and proper storage are required to ensure safe operation.
| Maximum Pressure | 3500 PSI |
|---|---|
| Maximum Flow | 16 gpm |
| Hydraulic Fluid Capacity | 18 gallons |
| Hydraulic Fluid Type | 10 wt AW32, ASLE H-150, or ISO32 |
| Coupler Size | 2" Ball |
| Maximum Towing Speed | 45 MPH |
| Maximum Log Length | 30 in. |
| Maximum Log Diameter | 24 in. |
| Maximum Log Weight | 340 lbs. |
| Pressure Relief Setting | 3500 PSI |
| Hydraulic Cylinder Bore | 5 in. |
| Hydraulic Cylinder Stroke | 30 in. |
| Dry Weight | 1175 LB |
| Overall Dimensions | 37" H x 105" L x 60" W |
The log splitter can split logs up to 30 inches long and 24 inches in diameter, lengthwise with the grain only.
Ensure the engine is off and the cylinder is fully retracted. Relieve pressure by moving the Split Control Lever back and forth. Remove the dipstick and verify the oil level reads full. Do not thread the dipstick when checking.