ABOV E-OCD II / OCD / OCD II EW8051 Setup Guide

This is a user guide that introduces how to develop ABOV devices in the 8051 debugger of IAR (C-SPY) environment.


ABOV E-OCD II / OCD / OCD II EW8051 Setup Guide - cover page
Brand
ABOV
Category
Other Electronics
Document type
Installation Guide
Language
English
Pages
17
File format
PDF
File size
690 KB
Published
20 October, 2023
Updated
20 October, 2023
MD5 checksum
8062D8B8BD49AE922553F37E4CA322D0

About this manual

This setup guide from ABOV explains how to develop ABOV 8051 devices in the 8051 debugger of the IAR (C-SPY) environment. It covers how to connect and detect the OCD, OCD II and E-OCD II dongles, how to detect ABOV's 8051 device, and how to debug it, including the USB kernel driver situation for each dongle and the ABOV SDK DLL that links the dongles to the IAR debugger.

The document also describes restrictions of the IAR 8051 debugger environment: SDK DLL compatibility according to IAR version, IAR project and Third-Party Driver settings, downloading a hex file to the target flash, option dialogs for devices that have options, and the number of built-in breakpoints for OCD and OCD II devices with the reduction of breakpoints in some products. An appendix gives an IAR version table matching versions to SDK DLL versions and lists ABOV devices by breakpoint count.

What's inside

  • Introduction
  • IAR Debugger Connections
  • USB Kernel Driver Installation
  • ABOV's SDK DLL Connections
  • IAR project settings
  • IAR Third-Party Driver settings
  • Use of IAR Debugger
  • Download Hexfile
  • Cautions for Debugging
  • SDK DLL Compatibility according to IAR Versions

Specifications

E-OCD II dongle driverUses the built-in HID of Windows; no additional driver installation needed
OCD / OCD II dongle driverRequires installation of a Kernel Driver on the PC
SDK DLL for IAR Embedded Workbench 8.0ABOV_OCD_IAR_1010.DLL
SDK DLL for IAR Embedded Workbench 8.1ABOV_OCD_IAR_1030.DLL
Built-in breakpoints of OCD IP8 breakpoints defined in a default spec
Built-in breakpoints of OCD II IP12 breakpoints defined in a default spec
Reserved breakpoints in IAR3 to 5, depending on debugger settings

Frequently asked questions

Does the E-OCD II dongle need a driver installation on the PC?

No. Because it uses the built-in HID of Windows, no additional driver is needed and it can be used immediately after connecting to the PC.

Which SDK DLL must be used with IAR Embedded Workbench 8.0?

ABOV_OCD_IAR_1010.DLL must be used when the IAR Embedded Workbench version is 8.0; version 8.1 requires ABOV_OCD_IAR_1030.DLL.

What happens when the target device is detected normally?

A Hex File is downloaded into the Flash of the target.

How many breakpoints are built in the OCD II IP?

The OCD II IP has 12 breakpoints defined in a default spec, while the OCD IP has 8.

Download PDF (690 KB)

More ABOV Manuals


View all ABOV manuals →