This document is Laser Scanner Programming Guide for SE923 laser engine
This manual provides step-by-step instructions for programming the Nordic ID Oy SE923 laser barcode engine used in RF-series hand terminals. It covers how to configure operational parameters such as laser on time, aim duration, power mode, and triggering modes. The guide also details how to enable or disable various barcode types including UPC-A, EAN-13, Code 39, and others, along with settings for check digits, prefixes, and transmission formats. Programming is done by scanning specific barcodes included in the manual with the scanner itself.
| Laser on Time | 3.0 sec |
|---|---|
| Aim Duration | 0.00 sec |
| Power Mode | Low Power |
| Time-out Between Same Symbol | 1.0 sec |
| Transmit “No Read” Message | Disable |
| Linear Code Type Security Levels | 1 |
| Bi-directional Redundancy | Disable |
| UPC/EAN Security Level | 0 |
| Scan Data Transmission Format | Data as is |
| Scan Angle | Normal Width |
Scan one of the eight barcodes corresponding to the desired format.
The default laser on time is 3.0 seconds.
The default aim duration is 0.00 seconds.
The default power mode is Low Power.