This manual introduces the design features, installation and maintenance methods of Resilience E.
This guide provides step-by-step instructions for installing and operating the Resilience E salt system, designed for pool professionals. It includes safety precautions, plumbing connections, electrical wiring requirements, salt addition procedures, and maintenance tips. The system generates chlorine from salt to disinfect pools without adding extra chemicals. Installation must comply with local codes and safety standards to avoid hazards.
The guide also covers system startup, chemical balancing, winterizing, and troubleshooting. It emphasizes the importance of proper installation, including minimum distances from pool walls, GFCI outlets, and correct plumbing placement. Safety warnings are prominently featured to prevent electric shock and improper operation.
| Voltage Range | 100-240Vac |
|---|---|
| Current Rating | 4A |
| Operating Temperature | 40°C |
| Installation Category | 2 |
| Altitude Limit | 2000m |
| IP Rating | IP66 |
The device is suitable for a voltage range of 100-240Vac.
The unit must be mounted at a minimum horizontal distance of 5 ft (1.5m) from the inside walls of the swimming pool.
The unit must be connected to a grounding type circuit protected by a ground-fault circuit-interrupter (GFCI) outlet rated for minimum 6 Amps.
Use the Salinity Demand Table to determine the amount of salt needed based on your pool size and desired concentration (typically 3500 ppm).