The manual includes product specifications, configuration, installation, preparation of the machine, stitch adjustment and other contents.
This manual provides detailed instructions for installing, configuring, and operating the JUKI PS-800-12080 sewing machine. It covers setup of the machine head, table, and feed mechanisms, threading and needle adjustment, lubrication, and maintenance procedures. It also includes sections on using the rotary knife subsystem, adjusting cutting parameters, and troubleshooting. The machine supports sewing speeds up to 3,000 sti/min and offers a 1200×800 mm sewing area with optional laser cutting.
The manual includes specifications for power, dimensions, and environmental conditions, as well as safety precautions for compressed air supply and knife operation. It also explains how to use the operation panel, configure parameters via USB, and handle error codes. Maintenance sections address lubrication, oil checks, and troubleshooting sewing conditions.
| Sewing Area (X,Y) | 1200 × 800 mm |
|---|---|
| Max. Sewing Speed | 3,000 sti/min (S type) / 1,800 sti/min (H type) |
| Needle Type | DB × 1 #8 (#7 to #14), DP × 5 #8 (#7 to #14) [S type]; DP17 #21 [H type] |
| Main Shaft Servomotor Power | 550W (S type) / 750W (H type) |
| Input Voltage | 220V ± 10% |
| Mass (Gross Mass) | 780 kg (Rotary knife type) / 788 kg (Laser type) / 850 kg |
| Dimensions | 2,180 mm (W) × 2,185 mm (L) × 1,250 mm (H) |
| Operating Temperature Range | 5 to 35 ˚C (Laser type: 1 to 35 ˚C) |
| Air Pressure Used | 0.5 to 0.6 MPa |
| Lubricating Oil | #10 (Equivalent to JUKI NEW DEFRIX OIL No. 1) / #32 (Equivalent to JUKI NEW DEFRIX OIL No. 2) |
3,000 sti/min when stitching pitch is 2.2 mm or less.
Start the machine, go to "Menu" > "Param File" > "Speed param", then adjust the "Head 2 speed (mm/s)" parameter.
Use #10 (equivalent to JUKI NEW DEFRIX OIL No. 1) or #32 (equivalent to JUKI NEW DEFRIX OIL No. 2).
1 to 35 ˚C.