This is a user manual, which contains product usage instructions and safety warnings
This manual provides safety warnings, assembly instructions, operating procedures, and maintenance tips for the Harbor Freight 63314 submersible pump. It emphasizes electrical safety, proper installation, and water type restrictions. Maintenance tasks are outlined for quarterly servicing, including cleaning the inlet screen and checking the check valve. Troubleshooting covers common issues like clogged impellers, low water levels, and excessive noise.
The pump is designed for fresh water only, with a maximum temperature of 77°F (25°C). It must be connected to a GFCI-protected outlet and must remain fully submerged. The manual includes a parts list and assembly diagram for reference, though repairs should be performed by certified technicians.
| Electrical Rating | 120 VAC / 60 Hz / 0.58 A |
|---|---|
| Power Cord Length | 12' |
| Maximum Flow @ 0' | 620 GPH |
| Maximum Head lift @ 0 Flow | 11' |
| Discharge Port | 1/2" |
The pump is designed for use with fresh water only. Do not use for salt water, highly chlorinated water, or water with a high pH level.
The pump must be connected to a GFCI-protected outlet with a supply voltage of 120 VAC at 60 Hz.
Perform quarterly maintenance at least once every 3 months under optimal conditions. More frequent maintenance is needed for frequent use or dirty areas.
Check power connections, ensure water level is adequate, clean clogged inlet screen or impeller, or consult a qualified technician if the motor is defective.