Clean Water Store Pro-OX 2510 Iron Filter Installation & Startup Guide

This is the instruction manual for a water purification device. It mainly introduces the usage methods, installation methods and maintenance methods of the device.


Clean Water Store Pro-OX 2510 Iron Filter Installation & Startup Guide - cover page
Brand
Clean Water Store
Category
Water heater
Document type
Installation Guide
Language
English
Pages
10
File format
PDF
File size
574 KB
Published
18 October, 2023
Updated
18 October, 2023
MD5 checksum
54FF863B910E3649425646BC76FB683B

About this manual

This guide provides step-by-step instructions for installing and starting up the Pro-OX 2510 manual backwash iron filter. It covers pre-installation checks, best practices for piping, assembly of the Fleck 2510 control valve and bypass, and the critical media activation process using liquid pool chlorine. The document also details the initial backwash and rinse cycles required to clear dust and fines from the new media before the system is ready for service.

What's inside

  • Packing List
  • Pre-Installation
  • Best Practices for Piping & Drain Installation
  • How Your Iron Filter Works
  • Assembly and Installation Instructions
  • Troubleshooting
  • Backwash and Rinse Cycle

Specifications

Minimum Pressure20 PSI
Maximum Pressure90 PSI
Installation Time3 to 5 hours
Media Activation1/2 cup liquid pool chlorine

Frequently asked questions

Can I use pipe-joint compound or Teflon tape on the tank threads?

No, you should not use pipe-joint compound, Teflon tape, Vaseline, or other petroleum greases to lubricate tank threads.

How much liquid pool chlorine must be added to activate the Pro-OX 2510 Iron Filter?

One cup of liquid pool chlorine must be added to activate the media.

How many times must the filter be backwashed and rinsed during initial startup?

The iron filter must be backwashed and rinsed 3 -4 times to clear out dust and fines.

What is the minimum water pressure required for the Pro-OX 2510 Iron Filter to operate?

A minimum of 20 PSI is required.

Download PDF (574 KB)