This manual includes the use instructions for EPFC-25-AA electric floor crane, including installation, operation, maintenance and other contents
This manual provides step-by-step instructions for receiving, operating, maintaining, and troubleshooting the Vestil EPFC-25-AA powered floor crane. It covers safety guidelines, control features, operation procedures, battery and charger use, maintenance, and troubleshooting. The crane is designed for heavy-duty lifting with a 24V DC drive and lift motor, featuring an ergonomic handle, electromagnetic brake, and emergency stop functions. It includes two 12V deep-cycle batteries for up to 8 hours of intermittent use.
The manual emphasizes safety, including hazard identification, proper inspection before use, and adherence to load limits. It also details control operations such as boom extension/retraction, travel, and braking, along with emergency stop procedures. Maintenance and troubleshooting sections guide users through routine care and problem resolution.
| Capacity | 2,500 / 1,300 / 600 lbs |
|---|---|
| Lift Height | 45¼ - 130" |
| Lift Speed Loaded | 1/2"/sec |
| Lower Speed Loaded | ¾"/sec |
| Travel Speed Loaded | 2.18 mph |
| Drive Motor | 24V/700W |
| Lift Motor | DC24V/2.0KW |
| Battery | 2x12V/70-80Ah |
| Battery Charger | 24V/12A |
| Gradeability | 0% |
| Overall Size | 79½x30x66⅜" |
The crane has a capacity of 2,500 lbs, 1,300 lbs, or 600 lbs depending on configuration.
Pressing the belly switch interrupts drive functions to stop the unit. Holding it down causes immediate reverse travel for ~3 seconds. A quick release stops the unit immediately.
It uses two 12V deep-cycle lead-acid batteries that provide 3-4 hours of operation when fully charged, up to 8 hours if used intermittently.
The lift speed when loaded is 1/2 inch per second.