This document introduces Eletta® manually operated tipper body covering system. This system is designed for vehicles without space between the load body and the driver’s cab. It is installed on the upper section of the cab guard and is ideally suitable for rear and three-way tipper bodies.
The Eletta® system is a patented covering solution for tipper bodies, installed on the cab guard and operated manually from the ground. It features a cable running 23 mm below the load body’s top edge to reduce damage risk. The system includes bows and tarpaulin for weather protection, with sliding pads to minimize friction. Components are made of electrogalvanized steel, with optional flame-retardant or waterproof tarp materials. It’s suitable for rear and three-way tipper bodies and can be integrated with accessories.
Installation options include standard mounting on body with cab guard or raised cab guard (centre). Dimensions vary based on load body width and rod length, with standard ranges provided. The system is designed for use in quarry, building, agriculture, and environmental applications, with manual roll-up operation.
| Cable diameter | 6 mm |
|---|---|
| Gearing unit diameter | 85 mm |
| Rod length | MIN 1900 - MAX 2400 mm |
| Load body width | MIN 1000 - MAX 2580 mm |
Available in green or black flame-retardant PVC mesh (350 g/sqm), waterproof coated PVC (650 g/sqm), or flame-retardant PVC (680 g/sqm).
It is a covering system designed for vehicles without space between the load body and the driver's cab, specifically for rear and three-way tipper bodies.
The operating cable runs 23 mm below the top edge of the loading body to reduce the likelihood of damage during loading.
The bows are arched at heights of 300, 400, and 500 mm to meet diverse load requirements.