This is a portable audio system with two wireless microphones. It can be connected to your MP3 player or Bluetooth music source to play music.
This manual covers the setup and operation of Rockville’s RAM12BT V2 and RAM15BT V2 portable Bluetooth pro audio speakers. It includes instructions for connecting wireless microphones, using Bluetooth and USB/SD inputs, adjusting volume controls, and avoiding feedback. The system features a high-power amplifier, 5-band equalizer, and built-in wheels for portability. Safety precautions and proper placement for optimal sound are also detailed.
The manual provides step-by-step guidance for connecting microphones, mixing consoles, and line inputs. It explains how to adjust volume levels, set up stage monitors, and avoid feedback. Technical specifications for both models are included, such as power ratings and speaker components.
| Peak Power | 600 Watts (RAM12BT V2) / 800 Watts (RAM15BT V2) |
|---|---|
| RMS Power | 150 Watts (RAM12BT V2) / 200 Watts (RAM15BT V2) |
| Tweeter | 25mm, 8 Ohm Titanium Diaphragm (RAM12BT V2) / 34mm, 8 Ohm Titanium Diaphragm (RAM15BT V2) |
Never set up your microphone in front of the speaker. Always set up your microphone behind the speaker. Approach the speaker from the rear when making adjustments.
The master volume control is the only volume control on the unit. Once all inputs are matched properly, use the master control as your volume.
Turn the RAM BT unit’s power switch to OFF, set Master Volume to 0, and Input 1 Level to 0. Connect the LEFT OUTPUT of the mixer to the Mic In of the Left RAM BT unit, and the RIGHT OUTPUT to the Mic In of the Right RAM BT unit. Switch on the units and slowly raise the mixer output to 0dB, then adjust Input 1 Level until you hear audible distortion.