This manual introduces the features of HandSet-JB Handset Recording Adapter (4 Pins to 2) and provides detailed instructions on how to connect, install, and use the product.
This document is the hardware manual for the Synway HandSet-JB Handset Recording Adapter (Version 1.1). The device is designed to convert 4-pin (RJ11) telephone handset interfaces to 2-pin connections for recording purposes, suitable for both analog and digital phone models. It features a transfer switch to accommodate different pin polarity arrangements (A-type and B-type) and includes a standard RJ11 jack for output to analog voice boards.
| Dimensions | 86mm x 61 mm x 26mm |
|---|---|
| Weight | ≈145g |
| Operating Voltage | 12V DC |
| Operating Current | ≤100mA |
| Frequency response | 300-3400Hz (±3dB) |
| Signal-to-noise ratio | ≥38dB |
| Input impedance | ≥1MΩ DC, ≥100kΩ AC |
| Output impedance | 600Ω AC |
Set the transfer switch to A-type first; if the recorded voices sound different in volume (one loud, one low), switch it to B-type.
The HANDSET and PHONE wires should be 2 meters or less, while the REC wire should be 100 meters or less.
No, this adapter can only be used indoors.