PV350 Pressure/Vacuum Transducer Module is a pressure sensor which measures the pressure difference (gauge pressure). Its measuring range is (-101.3 kPa to 1600 kPa). It can measure atmospheric pressure and vacuum.
The Fluke PV350 Pressure/Vacuum Transducer Module measures gauge pressure and converts it to 1 mV dc per unit. When paired with a high-performance digital multimeter (DMM) featuring a min/max function, the module serves as a datalogger capable of recording peak high and peak low values. The document provides detailed instructions on setup, zeroing, and unit selection.
| Output | 1 mV per unit (psi, kPa, cm-Hg or in-Hg) |
|---|---|
| Pressure Range | 0 psi to 500 psi |
| Vacuum Range | 0 in-Hg to -29 in-Hg |
| Pressure Accuracy | ±0.25 % of reading ±0.3 psi |
| Vacuum Accuracy | ±0.25 % of reading ±0.5 in-Hg |
| Maximum Working Pressure | 500 psi |
| Burst Pressure | 1000 psi |
| Battery Life | 300 hours (typical) |
| Weight | 12 oz, (336 grams) |
| Cable Length | 8 ft |
The module converts the measurement to 1 mV dc per unit.
Zero the module by turning the ZERO potentiometer until the DMM displays zero.
Replace the battery if the DMM displays less than 100 mV during the battery test.
The maximum working pressure is 500 psi.