Hi-Link HLK-RM08K UART-Ethernet-WiFi Module User Manual

This document is the user manual for HLK-RM08K produced by Shenzhen Hi-Link Electronic Co.,Ltd. It introduces the technical specifications, hardware description, electrical characteristics and other information of the product.


Hi-Link HLK-RM08K UART-Ethernet-WiFi Module User Manual - cover page
Brand
Hi-Link
Category
Other Electronics
Document type
User Manual
Language
Chinese
Pages
37
File format
PDF
File size
2.3 MB
Published
01 December, 2022
Updated
28 September, 2023
MD5 checksum
E44C41D14DFE068A65EE4ECA92BFEB0B

About this manual

The Hi-Link HLK-RM08K is a low-cost embedded module that converts data between serial ports, Ethernet, and wireless networks. It features an internal TCP/IP protocol stack and supports multiple operating modes including AP, STA, and APClient to facilitate network transmission for serial devices without requiring hardware changes.

The document provides detailed instructions on hardware interfaces, electrical characteristics, and various configuration methods. Users can configure the module via a Web interface, serial port AT commands, or a dedicated configuration tool. The guide also covers firmware upgrades, factory reset procedures, and specific electrical parameters for different working modes. This manual is written in Chinese.

What's inside

  • Product Introduction
  • Technical Specifications
  • Hardware Description
  • Electrical Characteristics
  • Quick Start Guide
  • Function Description
  • Parameter Configuration
  • Web Page Configuration
  • Serial Port AT Commands
  • Firmware Upgrade

Specifications

Wireless StandardIEEE802.11n, IEEE802.11g, IEEE802.11b
Wired StandardIEEE802.3, IEEE802.3u
Max Wireless Rate (11n)150Mbps
Max Wireless Rate (11g)54Mbps
Max Wireless Rate (11b)11Mbps
Frequency Range2.4~2.4835G
Transmit Power15~20dBm
Power Input VoltageDC:5±0.2V
No-load Running Current120±50mA
Operating Temperature-20~60℃

Frequently asked questions

What wireless standards does the HLK-RM08K support?

The module supports IEEE802.11n, IEEE802.11g, and IEEE802.11b standards.

What is the maximum wireless transmission rate in 11n mode?

The maximum transmission rate in 11n mode is up to 150Mbps.

What is the required power input voltage?

The module requires a DC power input voltage of 5±0.2V.

Download PDF (2.3 MB)