TP610C charger user manual, support Lipo/NiMH/Nicd/PB/A123 battery types, can charge, discharge, and recover batteries
This manual provides instructions for the Thunder Power TP610C RC charger, a digital power system designed for safely charging LiPo, NiMH, Nicd, PB, and A123 batteries. The device features a backlit LCD display, programmable memory profiles, and specific algorithms for different battery chemistries, including recovery modes for over-discharged packs.
The document details the physical layout of the unit, including the LCD screen, upgrade connector, and BL-2 balance tap connector. It outlines system features such as individual cell overcharge protection, adjustable charge/discharge cycles, and input/output polarity protection. Safety cautions and step-by-step procedures for connecting power, setting battery chemistry, and initiating charge or discharge cycles are included. This manual is written in Chinese.
| Input Power | 11-16V DC/10Amp at maximum charge rate |
|---|---|
| Supported Battery Chemistries | Lipo/NiMH/Nicd/PB/A123 |
| Charge Current | 0.25A---10A |
| Charge Control Type | Lipo/A123: CC/CV; Nicd/NiMH: constant current –V delta peak |
| Charge/Discharge Cycles | 9 cycles |
| Display Type | Backlit 2 x 16 dot LCD |
| Charge Maximum Output | 80 Watt |
| Dimensions | 118 x 85 x 28 (mm) |
| Weight | 265g/9.4OZ |
The charger supports Lipo, NiMH, Nicd, PB, and A123 battery chemistries.
The maximum charge current is 10A.
Press the [SEL] key for 2 seconds to display the balancer data on the LCD.
The charging process will be interrupted with an error message.