This document provides information on the installation and operation of the 300-29X Chlorine/Bromine Feeder for commercial-size applications. It emphasizes that the feeder should not be installed into copper plumbing to prevent pipe damage. The feeder should be installed above pool water level whenever possible. If installed below water level, specific instructions must be followed for safe and proper operation.
This guide provides installation instructions for the Rainbow 300-29X Chlorine/Bromine Feeder, designed for commercial-size applications. It details critical safety precautions, specifically warning against installation in copper plumbing and below water levels without proper isolation and draining procedures to prevent equipment damage and hazardous splash-back.
| Application Size | Commercial-size applications |
|---|---|
| Venting Requirement | No special venting required |
| Gas Escape | Completely enclosed-no escaping gases |
| Valve Type | Positive external no-clog chlorine control valve |
| Recommended Chlorine Residual | 1.0 to 1.5 ppm |
| Recommended Bromine Residual | 2.0-4.0 ppm |
No, never install the feeder into copper plumbing as pipe damage could occur.
The feeder is designed for clean Trichlor-s-trizinetrione or clean Bromine tablets; calcium hypochlorite must not be used.
Only Lifegard Silicone o-ring Lubricant should be used; oils or grease may cause fire.