This document is the owner's manual for Bontrager Trip ™ computers, covering Trip 1 and 4W models. It provides information on features, safety precautions, and terms used.
This manual introduces the Bontrager Trip bicycle computers, covering safety precautions such as avoiding long‑term staring at the display and keeping the wire clear of the tire, rim, or spokes. It explains the meaning of display elements, abbreviations, and how to select wheel size, units, and other settings using the two‑button interface.
Additional sections describe battery installation and replacement (CR2032, 3 V), how to reset trip data, custom wheel‑size calibration, automatic sleep mode after 10 minutes of inactivity, and troubleshooting tips for common issues like erratic data or low battery warnings.
| Battery type | CR2032 lithium cell, 3 V |
|---|---|
| Supported wheel sizes | Two wheel sizes can be programmed |
| Units of measurement | Miles per hour (MH) or Kilometers per hour (KMH) |
| Automatic sleep mode activation | After 10 minutes of no sensor signal |
Remove the computer from its base, rotate the battery cover counter‑clockwise, lift the cover, replace the CR2032 battery with the correct polarity, then replace the cover and rotate clockwise.
Hold the Reset button and the Trip Restart button simultaneously for two seconds; the trip data will be cleared to zero.
Measure the roll‑out of one wheel revolution, then scroll to the wheel‑size menu, hold for two seconds, and enter the four‑digit roll‑out value.
It turns off the display after ten minutes of no sensor activity to conserve battery life.