This document describes how to set up and troubleshoot the IGSS 7TOMRTCP Interface Driver. The driver implements the Omron FINS protocol stack on Ethernet using UDP/IP.
This manual describes how to set up and troubleshoot the IGSS 7TOMRTCP Omron FINS Ethernet interface driver. It covers the required software and hardware, installation methods, and driver configuration.
Installation can be performed automatically through the IGSS System Configuration or manually by copying the driver files and importing the registry. Configuration steps include setting FINS network and node addresses, and the document also lists error codes with suggested actions.
| Driver Version | 6.00.00 (build 3340) |
|---|---|
| FINS Network Address range | 0‑127 |
| FINS Node Address range | 1‑254 |
Open the IGSS System Configuration (sysconfig.exe) and verify that a driver with ID 85 is listed; if it is present the driver is already installed and you can proceed to configuration.
You need the files 7TOMRTCP.DLL, 7TOMRTCPc.DLL, and COMMDRV.REG in the GSS\ directory before importing the registry settings.
Check that the network connection to the PLC is working, for example by running ping commands, and verify that the driver is using the correct sequence numbers.