This operation manual provides instructions and precautions for using the XXL™ 212 Combo. It also includes information on other Peavey products and where to purchase them.
This manual begins with safety warnings to prevent electric shock, fire hazards, and moisture exposure. It stresses that the unit contains no user‑serviceable parts and must be serviced by qualified personnel. Basic operating cautions such as keeping the unit dry, using a polarized or grounded plug, and protecting the power cord are also covered.
The remainder of the guide explains the amplifier’s features and controls: power‑on switch, master volume, channel selectors, EQ and damping switches, reverb, effects loop, input and output jacks, speaker impedance settings, and footswitch connection. Power output can be set to 25 W, 50 W or 100 W, and the unit delivers 100 W RMS into 4 Ω, 8 Ω or 16 Ω loads. Warranty terms and service information are provided at the end of the document. This manual is written in Chinese.
| Power Output | 100 W RMS into 4 Ω, 8 Ω, or 16 Ω |
|---|---|
| Power Level Switch | 25 W, 50 W, 100 W |
| Damping Switch Positions | LOOSE, MEDIUM, TIGHT |
| Minimum Speaker Impedance | 4 Ω |
| Dimensions | 20.75" H × 26.5" W × 11.25" D |
| Weight | 63.7 lb (28.9 kg) |
| Nominal Input Level (Ultra channel) | -22.7 dB (73 mV RMS) |
Use the three‑position power level switch, which provides 25 W, 50 W, or 100 W output settings.
The amplifier requires a minimum speaker impedance of 4 Ω.
Connect the 7‑pin DIN footswitch cable before powering up the amp; the footswitch operates when the Ultra channel is selected.