This manual covers the Sampo EW‑N7074 bidet seat, a bathroom fixture that offers front and rear wash functions with adjustable water temperature and flow. It explains how to safely install, configure, and use the seat.
The document includes safety precautions, detailed installation procedures, panel operation guidance, water‑flow and temperature adjustments, cleaning instructions, and a simple troubleshooting guide for common issues. This manual is written in Chinese.
| Power Supply | 110V/60Hz 1500Wh |
|---|---|
| Dimensions | 53 mm × 51 mm × 17 mm (L × W × H) |
| Front Wash Flow Rate | ≈1 L/min |
| Rear Wash Flow Rate | ≈1.1 L/min |
| Minimum Water Pressure | ≥1.3 kgf/cm² |
Remove the existing toilet seat, disconnect the water supply, mount the new seat with the supplied bolts, connect the water pipe and power cable, then adjust and test the functions.
Make sure the water valve is fully open, verify the water pressure is at least 1.3 kgf/cm², and ensure the water‑volume knob is not set to the weak position.
Use the temperature control button to select one of four settings: low (~34 °C), medium (~38 °C), high (~40 °C), or room‑temperature.
Confirm the power source is 110 V, avoid spraying liquids on the unit, do not place heavy objects on the seat, and ensure all connections are secure before turning on the device.