This manual covers everything needed to install and safely use the Sampo WMA-132F front‑loading washing machine. It explains how to level the unit, connect the water supply and drain hoses, and set up the power source before first use. Safety precautions and emergency handling procedures are also included.
The guide details the control panel functions, how to select wash programs such as standard, strong, soak, and delayed start, and provides maintenance tips like cleaning the filter and keeping the machine level. A troubleshooting section helps diagnose common issues such as no water fill or drainage problems, and the specifications of the appliance are listed at the end. This manual is written in Japanese.
| Power Supply | 110V/60Hz |
|---|---|
| Power Consumption | 600W |
| Water Pressure | 0.03–0.8 MPa (0.3~8 kgf/cm²) |
| Weight | 53 kg |
| Water Capacity (high level) | 867 L |
| Dimensions (W×D×H) | 642 × 657 × 1018 mm |
| Maximum Laundry Capacity | 13 kg |
| Inlet Water Flow | 5–35 L/min |
Use the control panel buttons to choose between Standard, Strong, Soak, and other programs. Press the program‑selection key, then adjust water level, wash time, and spin speed as needed.
Check that the water inlet hose is properly connected and that the water tap is open. Verify that the inlet filter is not blocked and that the water pressure is within 0.03–0.8 MPa.