This product is a multi-function clamp multimeter that supports DC voltage, AC voltage, AC current, resistance, diode and continuity testing, phase indication, and line discrimination functions. It is suitable for maintenance, testing, debugging and other scenarios in the power, electrical, and electronic industries.
The VC3266A/L+ is a compact pocket‑size clamp multimeter featuring AC voltage, AC current, resistance, phase sequence, live‑wire detection, and diode testing functions. It uses three AAA batteries, has a 22 mm thickness, and displays measurements on a back‑lit LCD.
The manual explains how to select measurement ranges, connect probes, interpret LCD symbols, and perform safety checks. It also lists technical specifications, battery replacement procedures, and maintenance tips such as data‑hold and instrument inspection. This manual is written in Chinese.
| 外形尺寸 | 167 × 55 × 22 mm |
|---|---|
| 重量 | 约160 g（含电池） |
| 钳头开口尺寸 | 25 mm |
| 电源 | 3 × AAA (7号) 电池 |
| 工作温度范围 | 0 °C ~ 40 °C |
| 最大显示 | 1999 |
| 交流电流测量范围 | 2000 mA ~ 600 A |
Set the function switch to the 600 V range, insert the black and red probes into the COM and V/Ω sockets, connect to the source, and read the effective value on the LCD.
Select the fire‑wire detection function, connect the red probe to the test point, and if the LCD flashes, the wire is live; otherwise it is neutral.
Change the current range or ensure the measured current is within the maximum range.
Open the battery cover, remove the three AAA cells, insert new ones with correct polarity, and close the cover.