This manual provides an overview of the Lenovo P6SEP-ME REV2.2D V1.0 motherboard, its supported CPUs, chipset, integrated graphics, sound, memory slots and expansion slots. It also describes the power, reset, sleep and status LEDs and the layout of the board pins.
The guide explains how to configure BIOS settings, clear CMOS, set passwords, and install chipset, video and audio drivers from the supplied Lenovo driver CD. Instructions for connecting power switches, front‑panel connectors and other peripherals are included. This manual is written in Chinese.
| Supported CPU bus speeds | 66 MHz bus with 300/333/366/400/433/466 MHz Intel Celeron processors |
|---|---|
| Chipset | SIS620 chipset with 100 MHz system bus |
| Integrated graphics | 2D/3D display support |
| Integrated audio | AC97 sound card |
| IDE/ CD‑ROM support | Up to 4 IDE devices, PIO and Ultra DMA modes |
| Memory slots | Three 168‑pin 3.3 V DIMM slots supporting 16‑12 MB SDRAM |
| Expansion slots | Three PCI slots, one ISA slot |
| Front‑panel I/O | 2 USB ports, PS/2 mouse and keyboard ports, infrared remote port |
| Form factor | Micro‑ATX |
Press the key within a few seconds after power‑on to open the BIOS setup menu.
Clear the CMOS by setting the jumper J1 to the 'clear CMOS' position, then restore it.
Insert the Lenovo driver CD, navigate to the SIS620 folder and run SETUP.EXE to install the chipset and video drivers.
Select the Supervisor/User Password option in the BIOS menu, enter a password up to 8 characters, and confirm it.