Jotun Inhibitive Oil is a clear varnish based on petroleum resin. It is recommended for use as a temporary protective primer for lubricating oil tanks and fuel tanks, especially suitable for oil tank maintenance and protection in new shipbuilding.
Jotun 2L9CLR Inhibitive Oil is a petroleum‑resin based coating intended as a temporary protective primer for oil and fuel tanks, especially on new ships. The product is supplied in 20 L containers and is designed for clean, dry substrates such as bare steel or steel primed in a workshop.
The document provides film‑thickness ranges, theoretical coverage, surface‑preparation requirements, recommended application methods (spray, brush, roller), drying times at various temperatures, storage conditions, and health‑safety precautions. All parameters are based on ISO and BS standards and are intended for use in well‑ventilated environments above 5 °C. This manual is written in Chinese.
| Dry film thickness (typical) | 25 µm |
|---|---|
| Wet film thickness (typical) | 50 µm |
| Theoretical coverage (typical) | 20 m²/L |
| Solids content | 50 % ± 2 % |
| Flash point (closed cup) | 38 °C ± 2 °C |
The substrate temperature must not be lower than 5 °C and should be at least 3 °C above the dew point.
The flash point is 38 °C (closed cup) ± 2 °C.
At 23 °C the surface dry time is about 10 minutes.
The product is packaged in a 20 L container.