This manual describes the THEATRELIGHT SATELLITE series of digital silicon cases, designed for use in theaters, sports venues, and other fixed or mobile performance locations. The device features DMX512 signal control, signal hold, independent testing, and protection functions such as over-temperature alarms and automatic output cutoff.
The document provides detailed instructions on installation conditions, wiring connections for power and DMX signals, and the configuration of front panel functions. It explains how to set the DMX address, configure micro-switches for test or remote control modes, and adjust parameters like warm-up output, maximum output limits, and soft-start functions. This manual is written in Chinese.
| Input Power | Three-phase five-wire system, 220-250V, 50-60Hz |
|---|---|
| Control Signal | USITT DMX512 (1990) standard digital signal |
| Operating Temperature | 0 to 40 degrees Celsius |
| Relative Humidity | Less than 95% |
| MCB Rating (SAT 610) | 13A |
| MCB Rating (SAT 620) | 20A |
The DMX start address can be set arbitrarily between 001 and 512.
The silicon case maintains the signal of the previous scene and does not go dark.
Switch the 8th micro-switch to the upper position (ON) to enable test mode.
It sets the control signal mode: DMX512 (switch down) or RS485-9600 (switch up).