R-1000 type transformer winding machine is a special equipment for winding R-type iron core transformer coils. It has the advantages of accurate counting, smooth operation, safety and durability. It is also equipped with foot control function, which is easy to operate. It is suitable for small and medium-sized transformer production factories.
The R-1000 transformer winding machine is a dedicated device for winding R‑type iron‑core transformer coils. It consists of a controller, counting probe, chassis, motor, spindle friction wheel, clamping device, and foot‑pedal switch, offering accurate counting, smooth operation, and durable construction.
The manual covers detailed operation steps, foot‑pedal control modes, fault indications (E1‑E3), installation, routine maintenance, and safety precautions, ensuring users can set up, run, and service the machine correctly. This manual is written in Chinese.
| Transformer core range | R10~R1000 |
|---|---|
| Wire diameter range | Φ0.1~Φ1.8 |
| Maximum turns setting | 8999 (normal), 999 (large transformer) |
| Counting probe distance | 2~10 mm |
| Spindle speed | < 1200 rpm |
| Motor power | 200 W |
| Working voltage | AC 220 V, 50 Hz |
| Relative humidity | ≤ 90 % |
| Dimensions (L×W×H) | 450 mm × 340 mm × 340 mm |
| Net weight | 38 kg |
Press any key on the controller to clear the abnormal warning, then check and adjust the counting probe position or settings as needed.
Remove the hand wheel and bearing cover, then detach the left side plate. Use the provided tools to replace the friction wheel and re‑assemble.