Industrial

The TDA2822D is a low-voltage dual-channel power amplifier with a supply voltage as low as 1.8V, low crossover distortion, low quiescent current, and can be used in portable cassette players, radios, and CD players.

TDA2050 is a monolithic integrated circuit in a Pentawatt package, intended for use as an audio class-AB audio amplifier. Thanks to its high power capability the TDA2050 is able to provide up to 35 W true RMS power into a 4 ohm load at THD = 0%, VS = ±18 V, f = 1 kHz and up to 32 W into an 8 ohm load at THD = 10%, VS = ±22 V, f = 1 kHz. Moreover, the TDA2050 delivers typically 50 W music power into a 4 ohm load over 1 sec at VS = 22.5 V, f = 1 kHz. The high power and very low harmonic and crossover distortion (THD = 0.05% typ, at VS = ±22 V, PO = 0.1 to 15 W, RL= 8 ohm, f = 100 Hz to 15 kHz) make the device most suitable for both hi-fi and high-end TV sets.

The TDA2040 is an audio class-AB amplifier designed by STMicroelectronics. It is packaged in the Pentawatt® package and supports single or split power supply. It has a short-circuit protection and thermal shutdown system. It can provide up to 25W or 30W output power.

The TDA2030A is a monolithic IC designed for low-frequency class-AB amplification. It features 18W output power, high output current, very low harmonic and crossover distortion, short-circuit protection, and thermal shutdown. It is particularly suited for applications without regulated supply and for 35W driver circuits using low-cost complementary pairs.

TDA2009A is a 10+10W stereo amplifier chip with high output power, high current capability, short circuit protection and over-temperature protection.

The TBA820M is a monolithic integrated audio amplifier from STMicroelectronics with a rated output power of 1.2W and a working voltage range of 3V-16V. It is suitable for use in portable radios, cassette recorders and players.

The TDA7294 is a DMOS audio amplifier for home stereo, self powered loudspeakers and top-class TV applications, supporting 4 ohm and 8 ohm loads.

The TSC103 is a high-voltage, high-side current sense amplifier with independent supply and input common-mode voltages, wide common-mode operating range, low current consumption, pin selectable gain, and buffered output.

TSC1031 is a high-voltage, high-side current sense amplifier with independent supply and input common-mode voltages, wide common-mode operating range and surviving range, low current consumption, pin selectable gain, and EMI filtering. It is suitable for automotive current monitoring, DC motor control, photovoltaic systems, battery chargers, etc.

TSV629x, TSV629xA series micropower, wide bandwidth CMOS operational amplifiers, feature low power consumption, low voltage supply, high gain bandwidth product, good accuracy, low input offset voltage, low input bias current, EMI resistance and ESD resistance, and are suitable for battery-powered applications, portable devices, signal conditioning, active filtering and medical instrumentation.

TSV6290, TSV6290A, TSV6291, TSV6291A are a series of low-power high-gain factor CMOS operational amplifiers with low input bias current, low input offset voltage, high gain bandwidth product, etc., suitable for battery-powered applications, portable devices, signal conditioning, active filtering and medical instrumentation.

The TSV6390,TSV6390A,TSV6391,TSV6391A are low voltage, low power operational amplifiers from TI, with a gain bandwidth of 2.4MHz, which can operate in the supply voltage range of 1.5V-5.5V, with an output current of up to 63mA and an input bias current of 1pA, suitable for battery powered devices, portable devices, signal conditioning, active filtering and other applications.

The TS331, TS332 and TS334 are single, dual and quad micropower and low-voltage comparators. They can operate with a supply voltage ranging from 1.6 to 5 V with a typical current consumption as low as 20 μA. In addition, rail-to-rail inputs make them a perfect choice for low-voltage applications. Their availability in tiny packages is a real advantage for space saving constraints. The TS33x are specified for a wide temperature range of -40°C to +125°C, making them ideal for a wide range of applications.