Industrial

The M95640-125 is a 64kbit automotive serial SPI bus EEPROM with high-speed clock (10MHz) from ST.

The M24C32-125 is ST's automotive 32-Kbit serial I²C bus EEPROM, supporting 400 kHz fast mode and 100 kHz standard mode. It has a 32Kbit (4Kbyte) EEPROM memory array, a page size of 32 bytes, a write time of 5ms, a single supply voltage of 2.5V to 5.5V, a working temperature range of -40°C to +125°C, support for random and sequential read modes, write protection of the entire memory array, enhanced ESD/Latch-Up protection, more than 1 million write cycles, and data retention of more than 40 years.

The M24C64-125 is a 64Kbit automotive serial I2C bus EEPROM from ST company. It is compatible with all I2C bus modes, including 400 kHz fast mode and 100 kHz standard mode. The device has a 64Kbit (8K bytes) of EEPROM storage array, with a page size of 32 bytes. Write times for a byte and a page are 5 ms and 5 ms, respectively. The operating voltage is 2.5 V to 5.5 V and the operating temperature range is -40 °C to +125 °C. The device also features random and sequential read modes, whole memory array write protection, enhanced ESD/Latch-Up protection, over 1 million write cycles and over 40 years of data retention.

This document describes the features and characteristics of the M24256-125 automotive 256-Kbit serial I²C bus EEPROM, including compatibility with all I2C bus modes, 256 Kbit EEPROM memory array, 64-byte page size, byte write within 5 ms, page write within 5 ms, single supply voltage of 2.5 V to 5.5 V, operating temperature range from -40 °C to +125 °C, random and sequential read modes, write protect of the whole memory array, enhanced ESD/latch-up protection, more than 1 million write cycles, more than 40-year data retention, RoHS compliant and halogen-free packaging.

The M24512-125 is a 512-Kbit automotive EEPROM from ST that uses the I²C bus and features compatibility with all I2C bus modes, fast write speed, single supply voltage, wide operating temperature range, multiple read/write modes, write protection, ESD/Latch-Up protection, high reliability, and more.

Automotive 512-Kbit serial SPI bus EEPROMs with high-speed clock.

M24LR64E-R is a 64-Kbit EEPROM with password protection, dual interface and energy harvesting, supports 400 kHz I²C bus and ISO 15693 RF protocol, working frequency is 13.56 MHz.

M95256-A125 and M95256-A145 are automotive 256-Kbit serial SPI bus EEPROMs with high-speed clock.

M95128-125 is a 128-Kbit serial SPI bus EEPROM with high-speed clock from ST.

M95320-A125/A145 is a 32Kbit serial SPI bus EEPROM with high-speed clock. It features 32Kbits (4Kbytes) of EEPROM, 32 bytes of page size, 1/4, 1/2 or whole memory write protection, an additional write-lockable page (Identification page), high clock frequency 20MHz (VCC≥4.5V), 10MHz (VCC≥2.5V), 5MHz (VCC≥1.8V), and Schmitt trigger inputs for noise filtering.

The M24C64-A125 is a 64-Kbit serial I²C bus EEPROM from STMicroelectronics that is compatible with all I2C bus modes, including 1 MHz, 400 kHz and 100 kHz. It supports 40 years data retention, 1.8V to 5.5V wide operating voltage range and 125 °C temperature range

The M95128-A125 M95128-A145 is a 128-Kbit serial SPI bus EEPROM produced by ST with a high clock frequency.

The L6571 is a high voltage half bridge driver with a built-in oscillator. The frequency of the oscillator can be programmed using an external resistor and capacitor. The internal circuitry allows the device to also be driven by an external logic signal. The output drivers are designed to drive external n-channel power MOSFET and IGBT. The internal logic ensures a dead time to avoid cross-conduction of the power devices. Two versions are available: L6571A and L6571B. They differ in the internal dead time: 1.25μs and 0.72μs (typical).

The L6574 is a high voltage driver designed for lamp ballast applications. It is manufactured with BCD OFF LINE technology to ensure voltage ratings above 600V. The L6574 is capable of driving two power MOS-FETs in a half bridge topology to drive and control a fluorescent bulb. It features a dedicated timing section for pre-heat and ignition of the lamp, as well as a sense op amp for closed loop control or protection. The integrated bootstrap section and clamping on VS make the L6574 suitable for low cost applications.

The L6382D is suitable for microcontrolled electronic ballasts, including a PFC stage and a half-bridge stage, as well as a power management unit (PMU) with a reference voltage output that can supply the microcontroller in any condition.