Diodes Manuals - Page 5

Diodes manuals, page 5

• DIODES 1N4148WS BAV16WS handbook

  1N4148WS / BAV16WS is a surface mount fast switching diode with the following features: plastic case, UL flammability classification rating 94V-0, moisture sensitivity level 1 per J-STD-020A, cathode band, solderable terminals, MIL-STD-202 method 208 marking, weight approximately 0.004 grams, and ordering information is on page 2.

• DIODES 1.5KE6V8(C)A - 1.5KE400(C)A handbook

  1.5KE6V8(C)A - 1.5KE400(C)A 1500W TRANSIENT VOLTAGE SUPPRESSOR

• DIODES ZM4728A - ZM4764A 1.0W SURFACE MOUNT ZENER DIODE handbook

  This datasheet provides detailed information on the features and characteristics of the ZM4728A-ZM4764A, including power dissipation, rated voltage, forward voltage, and operating temperature range.

• DIODES AP1533 Manual

  AP1533 is a PWM control 1.8A step-down converter with low ripple power, high efficiency and excellent transient characteristics. The converter contains a reference voltage source, oscillation circuit, error amplifier and internal PMOS. The PWM control circuit is able to vary the duty ratio linearly from 0% to 99%. The converter also contains an error amplifier circuit as well as a soft-start circuit that prevents overshoot at startup. An enable function, an over current protect function and a short circuit protect function are built inside, and when OCP or SCP happens, the operation frequency will be reduced from 300KHz to 50KHz. Also, an internal compensation block is built in to minimum external component count. With the addition of an internal P-channel Power MOS, a coil, capacitors, and a diode connected externally, these ICs can function as step-down switching regulators. They serve as ideal power supply units for portable devices when coupled with mobile devices.

• DIODES INC.ZLDO485 4.85 VOLT ULTRA LOW DROPOUT REGULATOR ISSUE 2 - MAY 1997

  The ZLDO Series low dropout linear regulators have an exceptionally low dropout voltage, typically only 30mV with a load current of 100mA. The regulator series features output voltages in the range 2.7 to 18 volts, and this device provides an output voltage of 4.85 volts. The ZLDO485 consumes a typical quiescent current of only 1mA and is rated to supply load currents up to 300mA. A battery low flag is available to indicate potential power fail situations. If the input voltage falls to within 200mV of the regulated output voltage, then the error output pulls low. The device also features an active high disable control. Once disabled, the ZLDO quiescent current falls to typically 11µA. The ZLDO devices are packaged in Zetex SM8 8 pin small outline surface mount package, ideal for applications where space saving is important. The device's low dropout voltage, low quiescent current, and small size make it ideal for low power and battery powered applications. Battery powered circuits can make particular use of the low battery flag and shutdown features.

• DIODES INC. - AP133 300mA LOW QUIESCENT CURRENT FAST TRANSIENT LOW DROPOUT LINEAR REGULATOR handbook

  The AP133 is a 300mA, adjustable output voltage, low dropout linear regulator with low dropout voltage and low quiescent current, it is suitable for battery powered devices.

• DIODES INC. 3.3 VOLT ULTRA LOW DROPOUT REGULATOR ISSUE 2 - MAY 1997 ZLDO330 Manual

  The ZLDO330 low dropout linear regulator provides an output voltage of 3.3V with a typical quiescent current of only 560µA and a dropout voltage of 30mV at 100mA. It is packaged in the Zetex SM8 small outline surface mount package, ideal for space-saving applications.

• DIODES 1N5344B 1N5388B DATA SHEET

  The 1N5344B-1N5388B is a 5W Zener diode with a voltage range of 8.2V-200V. It has high surge capability and high reliability.

• DIODES BAS70TW /DW-04 DW-05 /DW-06 /BRW Manual

  This product is a surface mount Schottky barrier diode array with low forward voltage drop, fast switching, and ultra-small packaging.

• DIODES BAT54JW Data Sheet

  BAT54JW is a surface mount Schottky barrier diode array manufactured by Diodes Incorporated. It features a low forward voltage drop, fast switching, an ultra-small surface mount package, a PN junction guard ring for transient and ESD protection, and is lead free/RoHS compliant.

• DIODES BAS40/ -04/ -05/ -06 handbook

  BAS40/ -04/ -05/ -06 is a surface mount Schottky barrier diode with features including low forward voltage drop, fast switching, PN junction guard ring for transient and ESD protection, etc.

• DIODES AP1530 Manual

  AP1530 18V 3A 300KHz BUCK CONVERTER is a low-voltage drop, high-efficiency switching regulator from Diodes Incorporated. The device features an internal SW P-channel MOS and 300kHz PWM control, providing low ripple, high efficiency, and excellent transient characteristics.

• DIODES AP8801 Manual

  The AP8801 is a 500mA LED step-down converter designed to drive LEDs with a constant current. It can drive up to thirteen LEDs, depending on the forward voltage of the LEDs, in series from a voltage source of 8V to 48V.

• DIODES AP1510 Manual

  The AP1510 is a PWM control 3A step-down converter with an input voltage range of 3.6V to 23V and an output voltage range of 0.8V to VCC. The converter has an internal PWM control circuit that can vary the duty cycle linearly from 0% to 100%. It also has over current protection and short circuit protection. When OCP or SCP occurs, the operating frequency will be reduced from 300kHz to 30kHz. Additionally, an internal compensation block is built in to minimize external component count. With the addition of an internal P-channel Power MOSFET, an inductor, capacitors, and a diode connected externally, these ICs can function as step-down switching regulators. When coupled with the SOP-8L package, they serve as ideal power supply units for portable devices, providing such outstanding features as low current consumption.

• DIODES AP5004 PWM CONTROL 2.5A STEP-DOWN CONVERTER Manual

  AP5004 is a PWM controlled 2.5A step-down converter. It has an input voltage range of 10V to 32V and an adjustable output voltage range of 0.8V to 6V. It features PWM control with a duty ratio of 0% to 90%, a typical oscillation frequency of 300KHz, a short circuit protect frequency of 50KHz, a maximum standby current of 2uA, current limit and enable functions, thermal shutdown function, and a built-in internal N-channel MOS. The AP5004 provides low-ripple power, high efficiency, and excellent transient characteristics. It is suitable for high power system applications due to its high input voltage (32V), output current (2.5A), and small SOP-8L package size.