Key facts
- Manuals
- 14
- Models
- 1
- Languages
- EN
- Last added
- 2023-10-27
WEG models by category
Featured WEG manuals
WEG NEMA Low Voltage Electric Motor Installation and Maintenance Manual
The WEG Installation and Maintenance Manual covers the proper procedures for installing, starting, and maintaining three‑phase and single‑phase asynchronous squirrel‑cage induction motors (frame sizes 140T‑580T). It includes safety instructions, delivery and storage handling, mechanical and electrical installation steps, and start‑up checks.
Key sections address mechanical aspects such as foundation, alignment, and coupling, electrical aspects like feed systems and motor protection, routine maintenance (cleanliness, lubrication, bearing replacement), troubleshooting charts, and a detailed spare‑parts list with part numbers.
Covers: Introduction · Safety Instructions · Delivery and Storage · Mechanical Installation · Electrical Installation · Start‑up Procedures
WEG SSW-03 Plus User Manual
This manual provides complete instructions for the WEG SSW-03 Plus soft‑starter, covering safety notices, mechanical and electrical installation, wiring configurations (standard three‑cable and six‑cable delta), and optional devices such as the MAC‑0x module. Detailed parameter tables, error messages, and commissioning procedures are included.
The guide also describes how to use the HMI‑3P interface, SuperDrive PC software, and field‑bus options for configuration and monitoring, and supplies a spare‑part list, technical characteristics, and conformity information.
Covers: Safety Notices · Mechanical Installation · Electrical Installation · Connection Types · Parameter Settings · Commissioning
WEG SSW-05 Plus Installation and Operation Manual
The SSW-05 Plus is an electronic soft‑starter designed by WEG to start and stop three‑phase induction motors used in light‑duty loads such as centrifugal pumps, small fans and screw compressors. It supports serial communication for integration with PLCs, PCs or HMI devices.
This manual covers safety notices, product identification, technical specifications, wiring tables, connector torque settings, installation procedures, configuration parameters, digital relay operation, protection functions, fault diagnostics and warranty information. It also includes CE conformity annexes and a parts list for accessories.
Covers: Safety Instructions · Technical Data · Installation and Connection · Parameter Settings · Digital Relay Outputs · Protections and Displays
WEG CFW-10 Frequency Inverter User Manual
This manual covers safety notices, general information, and detailed installation steps for the WEG CFW-10 frequency inverter. It includes mechanical and electrical installation guidelines, wiring diagrams, and EMC requirements.
The document also describes keypad (HMI) operation, start‑up procedures, full parameter listings, diagnostics, and optional accessories. Technical specifications such as input voltage, output current, and switching frequency are provided for each model variant.
Covers: Safety Notices · General Information · Installation and Connection · Keypad (HMI) Operation · Start‑up · Detailed Parameter Description
Latest WEG manuals
WEG NEMA Low Voltage Electric Motor Installation and Maintenance Manual
Service Manual 36 pages · 615 KB · ENThis manual provides installation, safety, alignment, and maintenance guidelines for WEG NEMA low‑voltage electric motors.
WEG GERMANY MOTOR 11kW 4P 160M WFX1 technology data
This document describes the features and characteristics of the three-phase induction motor produced by WEG Indústrias S.A. The motor belongs to the IE2 high efficiency series, with a power output of 11 kW, frequency of 50 Hz, rated voltage of 380V, rated current of 22.1 A, insulation class of F, and enclosure rating of IP55. The motor is known for its high efficiency, low noise, and lightweight design.
WEG GERMANY MOTOR 10HP 2P 215JM WFF2 technology data
This document describes the features and characteristics of a three-phase induction motor, model 215JM - IP55, from the brand DeuChi TEFC - W22 JM High Efficiency. The motor has features such as high efficiency, rated power of 8.500 J, and rated current of 1.988 A.
WEG GERMANY MOTOR 3.5/14kW 8/4P 160L WFF1 technology data
This data sheet provides information about the WEG 160L three-phase induction motor, including power, frequency, poles, speed, rated voltage, rated current, rated torque, locked rotor torque, rated power factor, rated efficiency, temperature rise, locked rotor time, rated load, ambient temperature, altitude, enclosure, mounting, rotation, weight, moment of inertia, sound pressure level, etc.
WEG GERMANY MOTOR 90kW 4P 280S/M technology data
This data sheet provides detailed information about a 90 kW three phase induction motor, including rated voltage, frequency, poles, rated speed, slip, rated current, load current, no load current, rated torque, locked rotor torque, breakdown torque, design, insulation class, locked rotor time, service factor, duty cycle, ambient temperature, altitude, enclosure, mounting, rotation, weight, moment of inertia, sound pressure level, etc.
WEG GERMANY MOTOR 0.37kW 9S technology data
This is a datasheet for the WEG 90S series three-phase induction motor. The motor has a power of 0.37 kW and a frequency of 60 Hz.
WEG GERMANY MOTOR 5HP 2P 184T WFF2 technology data
This document provides specifications and characteristics of a three-phase induction motor manufactured by WEG Indústrias S.A. The motor belongs to the W22 series and complies with NEMA premium efficiency standards. It features a 184T frame, an output power of 5 HP (3.7 kW), a frequency of 50 Hz, 2 poles, and a rated speed of 2870 rpm. The motor utilizes a squirrel cage rotor design, has insulation class F, and a temperature rise of 80 K. It has an IP55 enclosure (TEFC - totally enclosed fan-cooled) and weighs approximately 40.0 kg.
WEG GERMANY MOTOR 1HP 2P B56C WCF1 technology data
This document is a detailed parameter description of the WEG NEMA 56 IP55-PEAL motor.
weg SSW07 SOFT-STARTER User's guide
This document is a user's guide for the SSW-07 E-S-P3 soft-starter, providing information on its installation, connection, and usage.
weg SSW04 Soft-Starter User's Guide
WEG SSW-03 Plus User Manual
User Manual 122 pages · 4.5 MB · ENThe WEG SSW-03 Plus soft‑starter user guide explains installation, wiring options, parameter settings and maintenance.
WEG SSW-05 Plus Installation and Operation Manual
User Manual 98 pages · 1.9 MB · ENThe WEG SSW-05 Plus Soft‑Starter installation and operation manual provides safety instructions, technical data, wiring diagrams, setup steps and…
WEG CFW-10 Frequency Inverter User Manual
User Manual 109 pages · 2.4 MB · ENThe WEG CFW-10 manual provides safety, installation, parameter, and troubleshooting information for this frequency inverter.
WEG CFW-11 Frequency Inverter User Manual
User Manual 91 pages · 6.7 MB · ENUser manual for the WEG CFW-11 frequency inverter covering safety, installation, operation and maintenance.
Which document do I need?
Service Manual
Disassembly, diagnostics and part numbers, for repair.
User Manual
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Questions answered in WEG manuals
What safety steps must be taken before performing maintenance on the motor?
All power sources must be disconnected, personnel should avoid contact with energized circuits or rotating parts, and fire‑fighting and first‑aid equipment must be visible and accessible.
From: WEG NEMA Low Voltage Electric Motor Installation and Maintenance Manual
How often should a motor in storage be inspected or rotated?
Motors stored for long periods should have their shafts manually rotated every three months, and periodic inspections are recommended in humid conditions.
From: WEG NEMA Low Voltage Electric Motor Installation and Maintenance Manual
What optional device is required when using a bypass contactor?
The MAC‑0x current‑acquisition module must be installed to maintain motor protection when a bypass contactor is used.
What must be done before performing maintenance on the SSW-05 Plus?
The power supply must be disconnected from the equipment before any maintenance work.
What is the allowed voltage range for the SSW-05 Plus power supply?
The SSW-05 Plus can be powered from 220 V to 460 V three‑phase.
How many digital inputs does the CFW‑11 have?
The inverter provides six isolated digital inputs for start/stop, direction, jog, and other functions.