Key facts
- Manuals
- 56
- Models
- 14
- Last added
- 2012-05-08
Teridian models by category
Latest Teridian manuals
TERIDIAN 73S8024RN handbook
The Teridian 73S8024RN is a low-cost smart card interface IC that meets the ISO-7816-3, EMV 4.0, and NDS specifications. It can be controlled by a dedicated control bus and provides card presence and fault notification to the system controller. The card clock can be generated by an on-chip oscillator using an external crystal or a clock signal. The 73S8024RN includes an ISO-7816-3 activation/deactivation sequencer that controls the card signals. Level-shifters drive the card signals with the selected card voltage (3V or 5V) from an internal Low Drop-Out (LDO) voltage regulator. With its embedded LDO regulator, the 73S8024RN is a cost-effective solution for applications with a 5V power supply. Hardware support for auxiliary I/O lines, C4 / C8 contacts, is provided. Emergency card deactivation is initiated upon card extraction or any fault generated by the protection circuitry.
TERIDIAN 73S8010R Low Cost Smart Card Interface handbook
TERIDIAN 73S8023C handbook
The 73S8023C is a low-power, high efficiency, single smart card interface IC suitable for 3V and 5V cards. It provides full electrical compliance with ISO- 7816-3 and EMV 4.0 (EMV2000) specifications. Hardware support for any type of synchronous cards (memory cards) is provided.
TERIDIAN 73S8024C handbook
The Teridian 73S8024C is a single smart card interface IC that provides full electrical compliance with ISO-7816-3, EMV 4.0, and NDS specifications. It interfaces with the system controller through a control bus, using digital inputs to control the interface and an interrupt output to inform the system controller of the card presence and faults. Data exchange with the card is managed from the system controller using the I/O line and auxiliary I/O lines if necessary. The device supports auxiliary I/O lines, C4 / C8 contacts. The card clock signal can be generated by an on-chip oscillator using an external crystal or by connecting to a clock signal from the system controller. The Teridian 73S8024C includes an ISO-7816-3 activation/deactivation sequencer that controls the card signals. Level shifters drive the card signals with the selected card voltage (3V or 5V) from an internal DC-DC converter. With its high-efficiency DC-DC converter, the Teridian 73S8024C is a cost-effective solution for smart card reader applications powered by a single 2.7V to 3.6V power supply. Emergency card deactivation is initiated when the card is removed or when a fault occurs in the protection circuitry. The fault can be related to the digital power supply (VDD) or the card power supply (VCC).
TERIDIAN 73S8010C handbook
The 73S8010C is a single smart card interface IC from Teridian. It meets ISO-7816-3 and EMV 4.0 specifications. It interfaces with the host through the two-wire I2C bus. Data exchange with the card is managed from the system controller using the I/O line (and eventually the auxiliary I/O lines). An on-chip oscillator using an external crystal, or connection to a clock signal coming from the system controller can generate the card clock signal. The 73S8010C IC incorporates an ISO-7816-3 activation/deactivation sequencer that controls the card signals. Level shifters drive the card signals with the selected card voltage (3 V or 5 V), coming from an internal DC-DC converter. With its high-efficiency DC-DC converter, the Teridian 73S8010C is a cost-effective solution for any smart card reader application to be powered from a single 2.7 V to 3.6 V power supply. Hardware support for auxiliary I/O lines, C4 / C8 contacts, is provided. Emergency card deactivation is initiated upon card extraction or upon any fault generated by the protection circuitry. The fault can be a VDD (digital power supply), a VCC (card power supply), a card over-current, or an over-heating fault.
TERIDIAN 73S8009R handbook
TERIDIAN 73S8009C Manual
This datasheet provides a detailed introduction to the 73S8009C, including power management, smart card interface, etc.
TERIDIAN 73S8009CN Combo ISO-7816 USB Universal Smart Card Interface IC handbook
The Teridian 73S8009CN is the world’s first single-chip smart card electrical interface circuit that supports all types of smart cards: 5V, 3V and 1.8V, including traditional ISO-7816-3 asynchronous and synchronous type 1 and type 2, as well as USB, ISO-7816-12 cards. It is ideally suited for applications such as desktop computers, laptops and general purpose smart card readers that require low power operation from a single 2.7V to 6.5V power supply voltage source. It provides control, conversion and regulation of power for the smart card. In addition, the circuit provides a 3.3V-regulated voltage that is used as an internal digital supply voltage to the host interface. It is also made available to supply power to some external circuitry (a host controller for instance).
TERIDIAN 73S8014R handbook
The Teridian 73S8014R is a single smart card (ICC) interface circuit, firmware compatible with 8024-type devices for configurations where only asynchronous cards must be supported.
TERIDIAN 73S8014RN handbook
TERIDIAN 73S1215F handbook
The 73S1215F is a versatile and economical CMOS System-on-Chip device intended for smart card reader applications.
TERIDIAN 78Q2120C 10/100BASE-TX Transceiver DATA SHEET
This data sheet introduces the features of the 78Q2120C 10/100BASE-TX transceiver
TERIDIAN 78Q2123/78Q2133 MicroPHY 10/100BASE-TX Transceiver
The 78Q2123/78Q2133 are 10/100BASE-TX Ethernet transceivers from Teridian Semiconductor Corporation. They support Category-5 unshielded twisted pair (Cat-5 UTP) and Category-3 unshielded twisted pair (Cat-3 UTP) cables and comply with IEEE-802.3 standards.
TERIDIAN 78Q8392L/A03 Low Power Ethernet Coaxial Transceiver
The 78Q8392L/A03 Ethernet Transceiver is a replacement for the SSI/TDK/Teridian 78Q8392L/A02 coax line transmitter/receiver. Only a single resistor value change is required for upgrading an existing 78Q8392L/A02 design to the 78Q8392L/A03. The device includes analog transmit and receive buffers, a 10 MHz on-board oscillator, timing logic for jabber and heartbeat functions, output drivers and bandgap reference, in addition to a current reference and collision detector. This transceiver provides the interface between the single-ended coaxial cable signals and the Manchester-encoded differential logic signals. Primary functional blocks include the receiver, transmitter, collision detection and jabber timer. This IC may be used in either internal or external MAU environments. The 78Q8392L/A03 is available in lead-free 16-pin plastic and 28-pin PLCC packages.
TERIDIAN 78Q21x3-DB MicroPHYTM MII Evaluation Board Manual
78Q21x3-DB MicroPHYTM MII Evaluation Board is a design example for a 10/100BASE-TX Mbit/second Fast Ethernet MII Interface adaptor