TEMIC Manuals

This document describes the features and characteristics of the Qualpack TSS463/TSS461C VAN controllers, including the serial interface and chip manufacturing process.

The U2896B is a modulation PLL for GSM, DCS, and PCS systems. It is realized using TEMIC's advanced silicon bipolar UHF5S technology and integrates a mixer, an I/Q modulator, a phase-frequency detector (PFD) with two synchronous programmable dividers, and a charge pump. The U2896B is designed for cellular phones such as GSM900, DCS1800, and PCS1900, applying transmitter architecture at which the VCO operates at the TX output frequency. No duplexer is needed since the out-of-band noise is very low. The U2896B exhibits low power consumption and broadband operation for high flexibility in multi-band frequency mappings. The IC is available in a shrinked small-outline 36-pin package (SSO36).

The U2896B is a monolithic integrated circuit manufactured using TEMIC Semiconductors’ advanced silicon bipolar UHF5S technology. The device integrates a mixer, an I/Q modulator, a phase-frequency detector (PFD) with two synchronous programmable dividers, and a charge pump. The U2896B is designed for cellular phones such as GSM900, DCS1800, and PCS1900, applying a transmitter architecture at which the VCO operates at the TX output frequency. No duplexer is needed since the out-of-band noise is very low. The U2896B exhibits low power consumption. Broadband operation provides high flexibility for multi-band frequency mappings. The IC is available in a shrinked small-outline 36-pin package (SSO36). Electrostatic sensitive device. Observe precautions for handling.

The U2895B is a monolithic integrated circuit designed for cellular phones such as GSM900, DCS1800, and PCS1900, applying a transmitter architecture at which the VCO operates at the TX output frequency. It has low power consumption, high flexibility and small package.

This document describes the features and characteristics of the U2894B monolithic integrated circuit (IC). The IC is designed for cellular phones such as GSM900, DCS1800, and PCS1900. It integrates a mixer, an I/Q modulator, a phase-frequency detector (PFD) with two synchronous programmable dividers, and a charge pump. The IC uses a transmitter architecture in which the VCO operates at the TX output frequency. No duplexer is needed since the out-of-band noise is very low. The U2894B exhibits low power consumption. Broadband operation gives you high flexibility for multi-band frequency mappings. The IC is available in a shrinked small-outline 28-pin package (SSO28). The U2893B offers the same functionality with other divider ratios. This IC is an electrostatic sensitive device. Observe precautions for handling.

The U2893B is a monolithic integrated circuit realized using TEMIC's advanced silicon bipolar UHF5S technology. It integrates a mixer, an I/Q modulator, a phase-frequency detector (PFD) with two synchronous-programmable dividers, and a charge pump. The U2893B is designed for cellular phones such as GSM, DCS1800, and PCS1900, applying a transmitter architecture where the VCO is operated at the TX output frequency. The U2893B exhibits low power consumption, and the power-down function extends battery life.

The M44C260/M48C260 is a family of 4-bit single chip microcontrollers from Temic Germany, M44C260 is a ROM type and M48C260 is an EEPROM programmable type, the main features include a 4-bit HARVARD architecture, 1µs instruction cycle, 4K 8-bit application program memory, 256 4-bit RAM, 16 8-bit EEPROM, 16 bidirectional I/O, 8 hard and software interrupt levels, 2 8-bit multifunction timers/counters and 32kHz on-chip oscillator.

The content of this document is from a PDF file, but no specific product information is provided.

The document describes the features and characteristics of BUD600 TELEFUNKEN Semiconductors, including SWOT technology, high-speed technology, planar passivation, low switching losses, low dynamic saturation, etc. It is suitable for applications such as electronic lamp ballast circuits and switch-mode power supplies.

The TS80C52X2 is a high performance CMOS ROM, OTP, EPROM and ROMless versions of the 80C51 CMOS single chip 8-bit microcontroller. It retains all features of the TEMIC 80C51 with extended ROM/EPROM capacity (8 Kbytes), 256 bytes of internal RAM, a 6-source , 4-level interrupt system, an on-chip oscilator and three timer/ counters. In addition, the TS80C52X2 has a dual data pointer, a more versatile serial channel that facilitates multiprocessor communication (EUART) and a X2 speed improvement mechanism. The fully static design of the TS80C52X2 allows to reduce system power consumption by bringing the clock frequency down to any value, even DC, without loss of data. The TS80C52X2 has 2 software-selectable modes of reduced activity for further reduction in power consumption. In the idle mode the CPU is frozen while the timers, the serial port and the interrupt system are still operating. In the power-down mode the RAM is saved and all other functions are inoperative.

TEMIC TS80C31X2 is a high-performance CMOS and ROMless version of the 80C51 CMOS single chip 8-bit microcontroller. The TS80C31X2 retains all features of the TEMIC TSC80C31 with 128 bytes of internal RAM, a 5-source, 4 priority level interrupt system, an on-chip oscillator, and two timer/counters. In addition, the TS80C31X2 has a dual data pointer, a more versatile serial channel that facilitates multiprocessor communication (EUART), and an X2 speed improvement mechanism. The fully static design of the TS80C31X2 allows to reduce system power consumption by bringing the clock frequency down to any value, even DC, without loss of data. The TS80C31X2 has 2 software-selectable modes of reduced activity for further reduction in power consumption. In the idle mode, the CPU is frozen while the timers, the serial port, and the interrupt system are still operating. In the power-down mode, the RAM is saved and all other functions are inoperative.

This document is about the TSC80C31 supplier information query service, which provides the features and characteristics of the product.

The U208B is an open loop phase control circuit manufactured by TELEFUNKEN Semiconductors. It has internal supply voltage monitoring, automatic retriggering, triggering pulse, and internal current and voltage synchronization. It is recommended as a low cost open-loop control.

Introduction to U4090B's functions and features, including microphone amplifier, earphone amplifier, ear protection, audio interface, audio switch, line detection circuit, audio amplifier, etc.