TEMIC Manuals

Key facts

Manuals

35

Models

7

Languages

EN

Last added

2012-08-10

TEMIC models by category

Featured TEMIC manuals

Telefunken TEA1024/TEA1124 Semiconductor Datasheet

Datasheet 8 pages · 115 KB · EN

The TEA1024/TEA1124 is a monolithic bipolar IC designed as a zero‑voltage switch for triac control in domestic equipment. It provides full‑wave drive, low current consumption, and an integrated ramp generator with selectable duration for 50 Hz mains.

The document lists electrical characteristics, absolute maximum ratings, package information, and example application circuits. It also includes a policy statement on ozone‑depleting substances for the semiconductor division.

Covers: Description · Power Supply and its Limitations · Full‑Wave Logic · Pulse Amplifier · Ramp Generator · Comparator

Latest TEMIC manuals

• TEMIC VN0610L VN10KE/KM VN2222L handbook

• TEMIC TSS463 VAN Van Controller Serial Interface TSS461C VAN Van Controller TSS463/TSS461C VAN Controllers 1999 January handbook

  This document describes the features and characteristics of the Qualpack TSS463/TSS461C VAN controllers, including the serial interface and chip manufacturing process.

• TEMIC U2896B Modulation PLL for GSM DCS PCS Systems handbook

  The U2896B is a modulation PLL for GSM, DCS, and PCS systems. It is realized using TEMIC's advanced silicon bipolar UHF5S technology and integrates a mixer, an I/Q modulator, a phase-frequency detector (PFD) with two synchronous programmable dividers, and a charge pump. The U2896B is designed for cellular phones such as GSM900, DCS1800, and PCS1900, applying transmitter architecture at which the VCO operates at the TX output frequency. No duplexer is needed since the out-of-band noise is very low. The U2896B exhibits low power consumption and broadband operation for high flexibility in multi-band frequency mappings. The IC is available in a shrinked small-outline 36-pin package (SSO36).

• TEMIC U2896B Modulation PLL for GSM DCS PCS Systems datasheet

  The U2896B is a monolithic integrated circuit manufactured using TEMIC Semiconductors’ advanced silicon bipolar UHF5S technology. The device integrates a mixer, an I/Q modulator, a phase-frequency detector (PFD) with two synchronous programmable dividers, and a charge pump. The U2896B is designed for cellular phones such as GSM900, DCS1800, and PCS1900, applying a transmitter architecture at which the VCO operates at the TX output frequency. No duplexer is needed since the out-of-band noise is very low. The U2896B exhibits low power consumption. Broadband operation provides high flexibility for multi-band frequency mappings. The IC is available in a shrinked small-outline 36-pin package (SSO36). Electrostatic sensitive device. Observe precautions for handling.

• TEMIC U2895B Modulation PLL for GSM DCS PCS Systems handbook

  The U2895B is a monolithic integrated circuit designed for cellular phones such as GSM900, DCS1800, and PCS1900, applying a transmitter architecture at which the VCO operates at the TX output frequency. It has low power consumption, high flexibility and small package.

• TEMIC U2894B Modulation PLL for GSM DCS PCS Systems handbook

  This document describes the features and characteristics of the U2894B monolithic integrated circuit (IC). The IC is designed for cellular phones such as GSM900, DCS1800, and PCS1900. It integrates a mixer, an I/Q modulator, a phase-frequency detector (PFD) with two synchronous programmable dividers, and a charge pump. The IC uses a transmitter architecture in which the VCO operates at the TX output frequency. No duplexer is needed since the out-of-band noise is very low. The U2894B exhibits low power consumption. Broadband operation gives you high flexibility for multi-band frequency mappings. The IC is available in a shrinked small-outline 28-pin package (SSO28). The U2893B offers the same functionality with other divider ratios. This IC is an electrostatic sensitive device. Observe precautions for handling.

• TEMIC U2893B Modulation PLL for GSM DCS PCS Systems handbook

  The U2893B is a monolithic integrated circuit realized using TEMIC's advanced silicon bipolar UHF5S technology. It integrates a mixer, an I/Q modulator, a phase-frequency detector (PFD) with two synchronous-programmable dividers, and a charge pump. The U2893B is designed for cellular phones such as GSM, DCS1800, and PCS1900, applying a transmitter architecture where the VCO is operated at the TX output frequency. The U2893B exhibits low power consumption, and the power-down function extends battery life.

• TEMIC Semiconductor M44C260/M48C260 handbook

  The M44C260/M48C260 is a family of 4-bit single chip microcontrollers from Temic Germany, M44C260 is a ROM type and M48C260 is an EEPROM programmable type, the main features include a 4-bit HARVARD architecture, 1µs instruction cycle, 4K 8-bit application program memory, 256 4-bit RAM, 16 8-bit EEPROM, 16 bidirectional I/O, 8 hard and software interrupt levels, 2 8-bit multifunction timers/counters and 32kHz on-chip oscillator.

• TEMIC BUD86/BUD87 Manual

  The content of this document is from a PDF file, but no specific product information is provided.

• TEMIC BUD600 Manual

  The document describes the features and characteristics of BUD600 TELEFUNKEN Semiconductors, including SWOT technology, high-speed technology, planar passivation, low switching losses, low dynamic saturation, etc. It is suitable for applications such as electronic lamp ballast circuits and switch-mode power supplies.

• Telefunken TEA1024/TEA1124 Semiconductor Datasheet

  Datasheet 8 pages · 115 KB · EN

  The Telefunken TEA1024/TEA1124 datasheet describes a zero‑voltage switch IC with integrated ramp generator, specifications, and application notes.

• TEMIC TS80C52X2 DATA SHEET(1)

  The TS80C52X2 is a high performance CMOS ROM, OTP, EPROM and ROMless versions of the 80C51 CMOS single chip 8-bit microcontroller. It retains all features of the TEMIC 80C51 with extended ROM/EPROM capacity (8 Kbytes), 256 bytes of internal RAM, a 6-source , 4-level interrupt system, an on-chip oscilator and three timer/ counters. In addition, the TS80C52X2 has a dual data pointer, a more versatile serial channel that facilitates multiprocessor communication (EUART) and a X2 speed improvement mechanism. The fully static design of the TS80C52X2 allows to reduce system power consumption by bringing the clock frequency down to any value, even DC, without loss of data. The TS80C52X2 has 2 software-selectable modes of reduced activity for further reduction in power consumption. In the idle mode the CPU is frozen while the timers, the serial port and the interrupt system are still operating. In the power-down mode the RAM is saved and all other functions are inoperative.

• TEMIC TS80C31X2 handbook

  TEMIC TS80C31X2 is a high-performance CMOS and ROMless version of the 80C51 CMOS single chip 8-bit microcontroller. The TS80C31X2 retains all features of the TEMIC TSC80C31 with 128 bytes of internal RAM, a 5-source, 4 priority level interrupt system, an on-chip oscillator, and two timer/counters. In addition, the TS80C31X2 has a dual data pointer, a more versatile serial channel that facilitates multiprocessor communication (EUART), and an X2 speed improvement mechanism. The fully static design of the TS80C31X2 allows to reduce system power consumption by bringing the clock frequency down to any value, even DC, without loss of data. The TS80C31X2 has 2 software-selectable modes of reduced activity for further reduction in power consumption. In the idle mode, the CPU is frozen while the timers, the serial port, and the interrupt system are still operating. In the power-down mode, the RAM is saved and all other functions are inoperative.

• TEMIC Semiconductor TSC80C31/80C51 handbook

  This document is about the TSC80C31 supplier information query service, which provides the features and characteristics of the product.

• TEMIC Semiconductor U208 handbook

  The U208B is an open loop phase control circuit manufactured by TELEFUNKEN Semiconductors. It has internal supply voltage monitoring, automatic retriggering, triggering pulse, and internal current and voltage synchronization. It is recommended as a low cost open-loop control.

Which document do I need?

Questions answered in TEMIC manuals