OKI Manuals

Key facts

Manuals

92

Models

2

Categories

2

Languages

EN

Last added

2026-10-03

OKI models by category

Featured OKI manuals

OKI ML7033 Dual-Channel Line Card CODEC Datasheet

Datasheet 50 pages · 2.2 MB · EN

The ML7033 is a 2‑channel Line Card CODEC CMOS IC designed for voice signals (300‑3400 Hz). It integrates analog‑to‑digital and digital‑to‑analog converters on a single 64‑pin QFP package and operates from a single 5 V supply with low power consumption.

The device offers selectable master clocks (2.048 MHz or 4.096 MHz), serial PCM data rates from 256 kHz to 4.096 MHz, and a range of built‑in tone generators, loop‑back functions, and SLIC interface signals, making it suitable for line‑card and subscriber line interface circuit (SLIC) applications.

Covers: General Description · Features · Block Diagram · Pin Configuration · Pin Descriptions · Control Register Assignment

Latest OKI manuals

• OKI ML7033 Dual-Channel Line Card CODEC Datasheet

  Datasheet 50 pages · 2.2 MB · EN

  The OKI ML7033 is a dual‑channel line‑card CODEC IC with integrated A/D and D/A converters for voice applications.

• OKI MR27V852E Manual

  The MR27V852E is an 8 Mbit electrically One Time Programmable Read-Only Memory (One Time PROM) with page mode. Its configuration can be electrically switched between 524,288-word × 16-bit and 1,048,576-word × 8-bit by the state of the BYTE pin. The MR27V852E supports high speed asynchronous read operation using a single 3.3V power supply.

• OKI MR27V852D handbook

  The MR27V852D is an 8Mbit electrically Programmable Read-Only Memory with page mode. Its configuration can be electrically switched between 524,288 word x 16bit and 1,048,576 word x 8bit. The MR27V852D operates on a single +3.3V power supply and is TTL compatible. The MR27V852D provides Page mode which can greatly reduce the read access time. Since the MR27V852D operates asynchronously, external clocks are not required, making this device easy-to-use. The MR27V852D is suitable as large-capacity fixed memory for microcomputers and data terminals. It is manufactured using a CMOS double silicon gate technology and is offered in 42-pin DIP, 44-pin SOP or 44-pin TSOP packages.

• OKI MR27V802D handbook

  The MR27V802D is an 8Mbit electrically programmable read-only memory whose configuration can be electrically switched between 524,288 word x 16bit and 1,048,576 word x 8bit. The MR27V802D operates on a single +3V-3.3V power supply and is TTL compatible. Since the MR27V802D operates asynchronously, external clocks are not required, making this device easy-to-use. The MR27V802D is suitable as large-capacity fixed memory for microcomputers and data terminals. It is manufactured using a CMOS double silicon gate technology and is offered in 42-pin DIP, 44-pin SOP or 44-pin TSOP packages.

• OKI MR27V801D handbook

  MR27V801D is an 8Mbit One Time PROM, manufactured using CMOS double silicon gate technology, suitable for large-capacity fixed memory for microcomputers and data terminals. It is offered in 32-pin DIP, 32-pin SOP or 32-pin TSOP packages.

• OKI MR27V6466F handbook

  The MR27V6466F is a 64 Mbit One Time Programmable Synchronous Read Only Memory that can be electrically switched between 4,194,304 x 16-bit (word mode) and 2,097,152 x 32-bit (double word mode) by the state of the WORD pin. The MR27V6466F supports high-speed synchronous read operation using a single 3.3 V power supply.

• OKI MR27V6452D handbook

  The MR27V6452D is a 64Mbit electrically Programmable Read-Only Memory with page mode. Its configuration can be electrically switched between 4,194,304 word x 16bit and 8,388,608 word x 8 bit. The MR27V6452D operates on a single +3.3V power supply and is TTL compatible. The MR27V6452D provides Page mode which can greatly reduce the read access time. Since the MR27V6452D operates asynchronously , external clocks are not required , making this device easy-to-use. The MR27V6452D is suitable as large-capacity fixed memory for microcomputers and data terminals. It is manufactured using a CMOS double silicon gate technology and is offered in 44-pin SOP package.

• OKI MR27V6402G handbook

• OKI MR27V6402D handbook

  MR27V6402D is a 64Mbit electrically programmable read-only memory whose configuration can be electrically switched between 4,194,304 word x 16bit and 8,388,608 word x 8bit. The MR27 V6402D operates on a single +3V-3.3V power supply and is TTL compatible. Since the MR27V6402 D operates asynchronously , external clocks are not required , making this device easy-to-use. The MR27V6402D is suitable as large-capacity fixed memory for microcomputers and data terminals. It is manufactured using a CMOS double silicon gate technology and is offered in 44-pin SOP package.

• OKI MR27V452D handbook

  MR27V452D is a 4Mbit electrically programmable read-only memory with page mode. Its configuration can be electrically switched between 262,144 word x 16bit and 524,288 word x 8bit. MR27V452D operates on a single +3.3V power supply and is TTL compatible. MR27V452D provides Page mode which can greatly reduce the read access time. Since MR27V452D operates asynchronously, external clocks are not required, making this device easy-to-use. MR27V452D is suitable as large-capacity fixed memory for microcomputers and data terminals. It is manufactured using a CMOS double silicon gate technology and is offered in 40-pin DIP, 40-pin SOP or 44-pin TSOP packages.

• OKI MR27V402D handbook

  The MR27V402D is a 4Mbit electrically Programmable Read-Only Memory with a configurable switch between 262,144 word x 16bit and 524,288 word x 8bit. It operates on a single +3V-3.3V power supply and is TTL compatible. The MR27V402D operates asynchronously, eliminating the need for external clocks and making it easy to use. It is suitable for use as a large-capacity fixed memory for microcomputers and data terminals. The device is manufactured using a CMOS double silicon gate technology and is available in 40-pin DIP, 40-pin SOP, or 44-pin TSOP packages.

• OKI MR27V401D handbook

  The MR27V401D is a 4Mbit electrically Programmable Read-Only Memory organized as 524,288 word x 8bit. It operates on a single +3V-3.3V power supply and is TTL compatible. The MR27V401D operates asynchronously, eliminating the need for external clocks. It is suitable as large-capacity fixed memory for microcomputers and data terminals. The device is manufactured using a CMOS double silicon gate technology and is offered in 32-pin DIP, 32-pin SOP or 32-pin TSOP packages.

• OKI MR27V3266D handbook

  The MR27V3266D is a 32Mbit One Time Programmable Synchronous Read Only Memory whose configuration can be electrically switched between 2,097,152 x16bit(word mode) and 1,048,576 x32bit(double word mode) by the state of the /WORD pin. The MR27V3266D supports high speed synchronous read operations using a single 3.3V power supply.

• OKI MR27V3255D handbook

  The MR27V3255D is a 32Mbit electrically Programmable Read-Only Memory with page mode. It can be electrically switched between 1,048,576 double word x 32bit and 2,097,152 word x 16bit. The MR27V3255D operates on a single +3.3V power supply and is TTL compatible. The MR27V3255D provides Page mode which can greatly reduce the read access time. Since the MR27V3255D operates asynchronously, external clocks are not required, making this device easy-to-use. The MR27V3255D is suitable as large-capacity fixed memory for microcomputers and data terminals. It is manufactured using a CMOS double silicon gate technology and is offered in 70-pin SSOP or 70-pin TSOP packages.

• OKI MR27V3252D handbook

  The MR27V3252D is a 32Mbit electrically Programmable Read-Only Memory with page mode. Its configuration can be electrically switched between 2,097,152 word x 16bit and 4,194,304 word x 8 bit. The MR27V3252D operates on a single +3.3V power supply and is TTL compatible. The MR27V3252D provides Page mode which can greatly reduce the read access time. Since the MR27V3252D operates asynchronously , external clocks are not required , making this device easy-to-use. The MR27V3252D is suitable as large-capacity fixed memory for microcomputers and data terminals. It is manufactured using a CMOS double silicon gate technology and is offered in 44-pin SOP or 48- pin TSOP packages.

Which document do I need?

Questions answered in OKI manuals

OKI manuals by category