ITT manuals, page 4
ITT CANNON - 75 Ohm Connectors
The document provides specifications and dimensions of Cannon 75 Ohm Connectors electronic components. These connectors are designed for a frequency range of 0 to 2 GHz with a nominal impedance of 75 ohms. They feature quick termination for reliable and cost-effective interconnect solutions. The connectors are suitable for applications in aerospace, broadcast, computer systems, defense electronics, geophysical, industrial automation, medical electronics, network systems, telecom switching, underwater systems, and wireless.
ITT C K Y Series 4 5 6 Tumbler Switchlocks 1
This document introduces the specifications and features of C&K Y Series 4, 5 and 6 Tumbler Switchlocks. The series offers anti-static switch design, multiple models and applications, including point-of-sale terminals, cash registers and computers.
ITT C K CR Series Round Single Pole Specialty Rocker Switches
The document provides specifications and dimensions of C&K CR Series Round Single Pole Specialty Rocker Switches. The features include a round actuator and body, multiple illuminated versions available, and an IP65 splash-proof rubber boot option. The switch is suitable for appliances, small and large, office equipment, computers and peripherals, audio/video equipment, etc.
ITT Industries MIL-C-81659 handbook
Cannon's DPXNA and DPXNE are rack and panel connectors designed for military, aerospace, and computer periphery equipment applications. They are designed to operate in temperatures ranging from -65°C to +125°C and meet or exceed the requirements of MIL-C-81659. The connectors are available in single, 2, 3, and 4 gang configurations and can accommodate 12 contact arrangements, contact sizes 12, 16, 20, and 22, and combination standard and coaxial contacts. The crimp snap-in contacts are retained by the LITTLE CAESAR® rear release contact retention assembly. Environmental sealing is achieved through wire sealing grommets and interfacial seals. The shell cavity locations are specified in the insert designation number in the charts.
ITT C K 7000 Series Miniature Toggle Switches
C&K 7000 Series Miniature Toggle Switches are multi-pole and multi-position, with a wide variety of actuator and termination options, epoxy terminal-seal compatible with bottom wash cleaning, and RoHS complaint models available.
ITT CANNON D Subminiature Commercial Micro D MDSM
MDSM is the commercial industry's smallest D-type connector for shielded I/O wire-to-board applications. Requiring less than 1/3 the area of a traditional D Subminiature connector, MDSM is designed for situations where space and EMI shielding are the primary design drivers. Unlike other micro connectors, MDSM's rugged construction and unique contact design combined with a PdNi contact finish provide durability of 10,000 mating cycles. All of this comes in a sleek package that includes a snap together shield can and a slide over boot producing a cable assembly with an overmolded look and a low assembled cost. MDSM is an ideal solution for applications where size, shielding, durability and aesthetics are key design criteria.
ITT C K KM Series Subminiature Pushbutton Switches Datasheet
KM series miniature pushbutton switches feature a reliable contact design and are available with pretravel and overtravel. An extended overtravel option is also available. The switches are RoHS-compliant and are suitable for applications such as alarm systems, computers, and detector switches.
ITT cannon Industrial Connectors CA-COM
This document introduces the design, technical data, ordering methods, contact arrangements, mounting dimensions, separating and coupling dimensions, shell styles and dimensions, accessories, contact dimensions, tools, and product safety information of CA-COM and CA-COM-B industrial connectors. The CA-COM-B connector features a bayonet coupling and is mateable with all connectors according to VG95234 and series CA-B. It can use solder or crimp contacts, offers contact arrangements with 1 to 37 contacts, supports wire sizes from 0.14 to 2.5 mm², has shells made of aluminum alloy to withstand high mechanical strain, and is surface protected by nickel plating. It also has a resilient insulator (polychloroprene) for a wide temperature range (-55/125°C) and is resistant against aggressive fluids like fuel, oil, etc. Environmental sealing can be achieved with adapters for PG termination, universal endbell, and heat shrink boots. It has a minimum of 500 mating cycles and is waterproof (1 bar, 12 hours). The CA-COM connector features a threaded coupling and is mateable with all connectors according to MIL-C-5015 and series CA. It can use solder or crimp contacts, offers contact arrangements with 1 to 37 contacts, supports wire sizes from 0.14 up to 2.5 mm², has shells made of aluminum alloy to withstand high mechanical strain, and is surface protected by nickel plating. It also has a resilient insulator (polychloroprene) for a wide temperature range (-55/125°C) and is resistant against aggressive fluids like fuel, oil, etc.
ITT KT Series DATA SHEET
This document provides specifications and dimensions for ITT Cannon's B-24 Tactile Switches, including different actuating forces and contact plating options. The switch features high shear force, easy pick and place, rubber or hard plastic actuator, press fit or snap fit caps, IP57 rating, and RoHS compliance. It is suitable for telecommunications, computer products, instrumentation, and power supply applications.
ITT C K Y Series 4 5 6 Tumbler Switchlocks DATA SHEET
C&K Y Series 4, 5 & 6 Tumbler Switchlocks M-3 is an anti-static switch from Itt Cannon with a contact rating of 4 AMPS @ 125 V AC or 28 V DC and an electrical life of 10,000 make-and-break cycles at full load. Typical applications include point-of-sale terminals, cash registers, and computers.
ITT Industries C K DA Series handbook
This document describes the features and characteristics of the C&K DA Series Miniature Single Pole Rocker Switches, including multiple options, guards to prevent accidental actuation, momentary and maintained functions, and IP65 splash proof rubber boot option.
ITT Micro Center Jackscrew MJS
The MJS jackscrew series provides a reliable interconnect for board-to-board, board-to-cable and in-line cable-to-cable applications. Layouts accommodating up to 76 MICROPIN/MICROSOCKETTM contacts are available, with the same wide range of options as are offered with the other MICRO Line products offered in this catalog.
ITT C K F Series Pushbutton Switches handbook
C&K F series pushbutton switches, up to 10 poles, with various contact terminals, mounting and switch ganging configurations, mechanical indicator buttons, illumination options, RoHS compliant.
ITT Industries ARINC 600 handbook
ARINC 600 BKAD/E/F connectors feature low insertion force contacts, both environmental and non-environmental versions, and removable polarizing posts. Field replaceable inserts are available for size 22 and power contacts, with up to 800 size 22 contacts in one connector. The connectors support crimp, coax, power, printed circuit, and wire wrappable post style contacts. They use standard DPX crimp and insertion/extraction tooling. Waveguide connections are also available. BKAF connectors are fully intermateable and intermountable with existing ARINC 600 connectors, allowing for easy contact replacement. The system maintains the advantages of low insertion force technology found in all ARINC 600 connectors.
ITT Industries MIL-C-26482 Series 2 Connectors
This document mainly introduces the characteristics of PV series connectors, including product size, military specifications, application scenarios, etc.