BB Manuals

The OPA2607 is a dual, high output, current-feedback operational amplifier that provides high output voltage swing and low distortion required for low turns ratio ADSL upstream driver applications.

The PCM78P is a low-cost, high-performance 16-bit audio A/D converter. It features fast conversion time, very low THD+N, and a wide input range. The product is suitable for applications such as DSP data acquisition, test instrumentation, digital audio tape, broadcast audio processing, and telecommunications.

The DAC7731 is a 16-bit digital-to-analog converter that provides 16-bit monotonic performance and offers a configurable output swing of ±10V, ±5V, or +10V. It features a high-speed output amplifier with a maximum settling time of 5µs and consumes only 150mW of typical power.

Encore is a compression moulded, reinforced, natural mineral filled homogeneous nonporous acrylic. It has colour consistency running throughout its 5mm surface. Encore’s unique structure gives it some great performance characteristics including: - the best stain resistance properties compared to most other solid surfacing materials. - the most heat tolerant solid surfacing, tested up to 240°C. - the best scratch, chip, shatter and wear properties. - resistance to most chemicals ie: solvents, acids, alkalis and many other chemicals found in daily domestic use. - hygienically easy to maintain and UV resistant. Encore comes with a 10 year guarantee. Composition 5mm thick reinforced acrylic face. P3 grade environmentally preferred 38mm thick chipboard PEFC certified. Balanced with 0.8mm high pressure decorative white laminate. The unique edge construction is formed using waterproof acrylic colour matched adhesive. The worksurface features a 3mm top radius. Worksurfaces 44mm thick available in 2 sizes: - Worktop 4100mm x 650mm finished front and both short edges, approx weight 83kg. - Breakfast Bar 2400mm x 900mm finished all four edges, with a 1000mm radius bow and a square end, approx weight 67kg. Designers should consider the extra thickness of Encore in comparison to Bushboard laminate worksurfaces. Special care should be taken when designing kitchens with both tall housings and worktop dresser units. Please seek advice from your furniture supplier.

The MPC100 is a wide bandwidth 4x1 video multiplexer with features like high bandwidth, low interchannel crosstalk, low switching transients, and low differential gain/phase errors, suitable for RF and video applications.

This file introduces the features of MPC104 switch, including bandwidth, interchannel crosstalk, switching transients, distortion, quiescent current, applications, etc.

MPC508A and MPC509A are single-ended 8-channel/differential 4-channel CMOS analog multiplexers fabricated by BURR-BROWN and available in plastic DIP and plastic SOIC packages.

The MPC508A and MPC509A are CMOS analog multiplexers with input overvoltage protection.

The DCV01 series is a family of 1W, 1500Vrms isolated, unregulated DC/DC converters. Requiring a minimum of external components and including on- chip device protection, the DCV01 series provides extra features such as output disable and synchroniza- tion of switching frequencies. The use of a highly integrated package design results in highly reliable products with a power density of 40W/in3 (2.4W/cm3). This combination of features, high isolation, and small size makes the DCV01 suit- able for a wide range of applications.

The DCV01 series is a family of 1W, 1500Vrms isolated, unregulated DC/DC converters. Requiring a minimum of external components and including on-chip device protection, the DCV01 series provides extra features such as output disable and synchroniza- tion of switching frequencies.

DCV01 is a family of 1W, 1500Vrms isolated, unregulated DC/DC converters. It has features such as up to 85% efficiency, thermal protection, device-to-device synchronization, short-circuit protection, EN55022 CLASS B EMC performance, UL1950 recognized component, JEDEC PDIP-14 and GULL-WING packages. It is suitable for various industrial control and instrumentation, point-of-use power conversion, ground loop elimination, data acquisition, test equipment, secondary isolation circuits, etc.