Vishay manuals, page 20
VISHAY TFDU4300 Manual
TFDU4300 is a low profile infrared transceiver module from Vishay. It features a 2.5mm low height package, support for low voltage IO interfaces, compliance to the latest IrDA® physical layer standard, and speeds up to 115.2kbit/s for fast data transmission. It also supports carrier based remote control applications.
VISHAY TSUS4300 Manual
TSUS4300 is an infrared emitting diode produced by Vishay Semiconductors. It is made of standard GaAs on GaAs technology and has a transparent blue plastic package. The device has high radiant power and radiant intensity, low forward voltage, suitable for DC and high pulse current operation, standard T-1(∅ 3 mm) package, ±16° half power angle, 950nm peak wavelength, high reliability, good spectral matching to Si photodetectors, lead-free component, in accordance with RoHS 2002/95/EC and WEEE 2002/96/EC standards. It is used in small packages and low-cost requirements of infrared remote control systems in combination with silicon photo detectors, infrared source in reflective sensors, table end detection. It has excellent matching with photo-transistor TEFT 4300.
VISHAY SL02 03 04 Manual
SL02 / 03 / 04 is a series of small signal Schottky diodes produced by Vishay Semiconductors, with low power loss, high efficiency, and high temperature soldering.
VISHAY TSOP62.. handbook
The TSOP62.. is a miniaturized SMD-IR Receiver Modules for infrared remote control systems, supporting all major transmission codes. It has photo detector and preamplifier in one package, internal filter for PCM frequency, continuous data transmission possible, TTL and CMOS compatibility, output active low, low power consumption and high immunity against ambient light.
VISHAY SFH617A handbook
VISHAY SFH617A is a high-reliability optocoupler with features including 5300 VRMS isolation test voltage, 70 V high collector-emitter voltage, low saturation voltage, fast switching times, low coupling capacitance, and high common-mode interference immunity.
VISHAY SEMICONDUCTOR TEMD5100 Manual
TEMD5100 is a high speed and high sensitive PIN photodiode in a miniature flat plastic package. Its top view construction makes it ideal as a low cost replace- ment of TO–5 devices in many applications. The epoxy package itself is an IR filter, spectrally matched to GaAs or GaAs on GaAlAs IR emitters (λp=950nm). The large active area combined with a flat case gives a high sensitivity at a wide viewing angle.
VISHAY VLMG31.. Manual
This document introduces the features and characteristics of Vishay Semiconductors VLMG31 series SMD LED products, including high brightness, compatibility with automatic placement equipment, RoHS compliance, compatibility with multiple soldering processes, and low power consumption.
VISHAY TCMT11.. Series/TCMT4100 Manual
TCMT11.. Series/TCMT4100 is a product of Vishay Semiconductors. It is a photocoupler with low profile package, low coupling capacitance and low temperature coefficient.
VISHAY VCUT0714A-02Z handbook
VCUT0714A-02Z is a single-line ESD-Protection diode from Vishay. It features working voltage range of -7V to +14V, leakage current less than 0.1 uA, capacitance less than 8.0 pF, ESD immunity according to IEC 61000-4-2 standard, tiny SOD923 package, height less than 0.4mm, lead free component, matte tin lead finish, nonmagnetic package material, green molding compound, and RoHS 2002/95/EC and WEEE 2002/96/EC compliance.
VISHAY SEMICONDUCTOR LH1520AB/LH1520AAC/LH1520AACTR Manual
The LH1520 dual 1 form A relays are SPST normally open switches that can replace electromechanical relays in many applications. They are constructed using a GaAIAs LED for actuation control and an integrated monolithic die for the switch output. The die, fabricated in a high-voltage dielectrically isolated technology is comprised of a photodiode array, switch control circuitry, and MOSFET switches. In addition, the LH1520 SSRs employ current limiting circuitry, enabling them to pass FCC 68.302 and other regulatory surge requirements when overvoltage protection is provided.
VISHAY - CQY80N/ CQY80NG Optocoupler Phototransistor Output With Base Connection handbook
CQY80N/CQY80NG is an optocoupler from Vishay Semiconductors, which has UL94-VO grade insulation material, low coupling capacity, high common mode rejection, 55/100/21 climate classification, low temperature coefficient, 6 kV peak transient overvoltage, 1.6 kV insulation voltage, 600 VRMS of insulation voltage, 600 VRMS of recurring peak voltage, 0.75 mm of insulation thickness, and meets RoHS 2002/95/EC and WEEE 2002/96/EC regulations
VISHAY SEMICONDUCTOR GL05T to GL24T Manual
This document introduces the GL05T to GL24T series of low capacitance ESD protection diodes for high-speed data interfaces. The product features transient protection as per IEC 61000-4-2 (ESD) and IEC 61000-4-5 (Lightning), making it suitable for data lines, USB port protection, LAN equipment, etc. It is packaged in a small size for use in portable electronics and complies with RoHS and WEEE standards.
VISHAY TSOP362.. Manual
This document introduces the basic information of the TSOP362.. series infrared receiver modules, including feature characteristics, package size, pin definition, application circuit, absolute maximum ratings, electrical and optical characteristics.
VISHAY VLMW41.. Manual
VLMW41.. is a white SMD LED from Vishay. The package is PLCC-2. It supports reflow, vapor phase and wave soldering processes. It is compatible with RoHS and WEEE standards, and conforms to AEC-Q101 19225 e3 automotive electronic components standard.
VISHAY SFH610A SFH6106 Manual
The SFH610A / SFH6106 is a high reliability optocoupler with a 5300VRMS isolation voltage. This product features a high current transfer ratio, low coupling capacitance and high isolation voltage.